A & M Industrial Wood Products & J. Alexander Company

• SCMI Model Z32-D Automatic CNC Panel Saw, s/n GA0053, 120 in. Maximum Rip Cut, 120 in. Pull Back, Programmable Rear Fence, Holddowns, Cross Cut Side Aligner, 13.8 in. Main Blade, 10 HP, 1.5 HP Scoring Blade, (3) Air Floatation Tables (Location; Dayton, Ohio)

• Holzma Optimat Model OPT.HPP82/38 CNC Panel Saw, s/n 0-240-15-1287, New 2001, Front Load, 149.6 in. Max. Cutting Length, 3.7 in. Max. Saw Blade Projection, 18 HP Main Motor, 3 HP Scoring Motor, Cadmatic CNC Control, Saw Carriage Speed 16-410 FPM, Electronic Controlled Overhead Programmable Fence, Clamps, Cross Cut Fence, (3) Air Floatation Support Tables, Combi-Rollers Rear Machine Table (Location: Dayton, Ohio)

• Casadei Model Linea MX CNC Panel Saw, s/n 02-L1-016, New 2002, Front Load, 150 in. Max. Cutting Length, 9 HP Main and Scoring Motor, 2.2 in. Max. Cut Height, Carriage Travel 13-47 FPM, Return 47 FPM, Programmable Pusher Fence, 98.5 in. Pusher Stroke, Material Grips, CNC Control, (3) Front Air Floatation Support Tables, Cross Cut Fence (Location: Dayton, Ohio)

• Holz-Her Model 1317-2 Edge Bander, s/n 4595/0-704, New 2007, PPC Programmable Controller, .015 in.-.314 in. Thickness Capacity, 2.17 in. Max. Edging Width, Workpiece Minimum Width and Length, 2.36 in. X 7.09 in.,  Protective Hood, Pre-Milling Station; Edgestrip Magazine; Gluing Station; Pneumatic Pressure Unit; End Trim Unit; Combination Flush, Chamfer and Radius Trim Unit; Scraper Unit; Corner Rounding Unit; Buffing Unit

• Holz-Her Model 1255 Vertical Panel Saw, s/n 2989, New 2007, 169 in. Max. Cutting Length, 71.25 in. Max. Cutting Height, 2.36 in. Max. Cutting Depth (Without Scoring), 10 in. Saw Blade Diameter, 6,540 RPM Blade Speed, 5.5 HP Motor, V-Cutter, Copy Wheel, Scoring Blade

• Thermwood Model 53 CNC Router, s/n C530920198, New 1998, Thermwood Model 91000 CNC Control, 5 ft. X 10 ft. Capacity, 10 in. Vertical, (1) 15,000 RPM Head, Roller Holddowns and Pneumatic Clamping (3 clamps), Fixed Table with Movable Programmable Gantry, Vacuum System (No Vacuum Pump)

• Accu-Router/Powermatic Model 48 CNC Router, s/n 8748014, Fanuc GNO CNC Control, 4 ft. X 10 ft. Capacity, 6 in. Vertical, (1) 18,000 RPM Head, Roller Holddowns

• Alden 3 in. X 12 in. Gang Rip Saw, s/n 6711, 15 HP, 6-Roll, 2 HP Feed Motor

• Whirlwind Model 212 Pneumatic Pop-Up Cut Off Saw, s/n 3378576R, 18 in. Capacity, 10 HP, 3,165 RPM, 60 Cuts Per Minute Max., Capacity 1 in. X 13 in., 2 in. X 12 in., or 4 in. X 10 in., Right Hand,  8 ft. Conveyor Tables (2)  

• Tiger Stop 10 ft. Programmable Stop (1 Set Legs only)

• Tiger Stop 10 ft. Programmable Stop (2 Sets Legs)

• Delta 12 in.-14 in. Table Saw, Tilt Arbor, 5 HP, Model 34-350, s/n 1496218, with Woodtek Power Feed

• Skilsaw Radial Arm Saw, s/n 958022, 2 HP, 12 in. Blade

• Southworth Model LS4-36 Scissor Lift Table, 4,000 Lb. Capacity, 24 in. X 48 in. Table, Foot Pedal

• Torit Model 80 Dust Collector, s/n IG44113, with Noise Muffler

• Torit Model 64 Dust Collector, with Noise Muffler

• Thompson 6 in. X 18 in. Hand Feed Surface Grinder, s/n D60208, Walker Ceramax Fine Pole Chuck

• Do-All 36 in. Vertical Band Saw, Model V36, with Blade Welder

• Doucet Model BTRS-71 Return Conveyor, 5 ft. Receiving Conveyor, 35 in. Width Receiving Conveyor, 30 in. Width Return Conveyor

• Micro Air Model MC2500 Smoke and Fume Collector, Ceiling Mount, (2) Snorkle Intakes, 1,200 CFM Per Arm Intake

Addition Lots

Moulder Knifes • Senco Staple Gun • (3) Pneumatic Tools • Tapmatic 30X Tapping Head, New in Box • Hand Tools • Jet Guide Blocks, for 14 in. Vertical Band Saw, New in Boxes • Dayton Progress Punch and Die Sets • Paslode Staples, Model GSN-18-3/4 in., Several Boxes