Cambridge Machine and Supply Company

HOLLOW SPINDLE/OIL FIELD LATHE

• SUMMIT Model 38-12 X 120” Hollow Spindle Lathe, s/n 04270118, New 1986, 12 3/8” Spindle Bore, 39 1/2” Swing Over Bed, 51 1/8” Swing in Gap, 120” Centers, Inch/Metric Threading, Steady Rest, 33 3/8” 4-Jaw Front and Rear Chucks, Taper Attachment

LARGE CAPACITY LATHE

• NILES 54” X 276” Heavy Duty Lathe, s/n 21696, 36” 4–Jaw Chuck, Steady Rest

ENGINE LATHES

• SUMMIT Model 20-4 X 120” Engine Lathe, s/n 03476637, 4 1/8” Spindle Bore, 20” Swing Over Bed, 30” Swing in Gap, 120” Centers, Inch/Metric Threading, Steady Rest, 10” 3-Jaw Chuck, Face Plate, Taper Attachment

• TARNOW/TOOLMEX Model TUJ50-120 Engine Lathe, s/n 3742, 20” X 120” Capacity, 31” Swing in Gap, Inch/Metric Threading, Gap Bed, Taper Attachment, 3 1/2” Spindle Bore, 10” 3-Jaw Chuck, 16” 4-Jaw Chuck, Steady Rest

• SELECT Model 1880GH Engine Lathe, s/n 2JE0374A, 18” X 80” Capacity, 3 1/4” Spindle Bore, Inch/Metric, 12” 3-Jaw Chuck, 15” 4-Jaw Chuck, Steady Rest, Gap Bed, Taper Attachment

VERTICAL TURRET LATHES

• BULLARD Man-U-Trol 42” Vertical Turret Lathe, s/n 26159, 42” 3-Jaw Universal Chuck, 4-Sided Turret, Moveable Cross Rail, 37” Max Under Rail, Side Head

• BULLARD 42” Vertical Turret Lathe, s/n 10089, 42” 3-Jaw Chuck, 5-Position Ram Turret, Side Head

• BULLARD 36” Vertical Turret Lathe, s/n 11554, 34” Chuck with (4) Jaws, 5-Position Ram Turret, Side Head

• NILES-BEMENT-POND 96” Vertical Turret Lathe, s/n 19776, 96” 4-Jaw Chuck/Face Plate, Traveling Rail, 48” Max Under Rail, (2) Vertical Spindles, Both On Swivel Bases

HYDRAULIC POWER SQUARING SHEAR

• ATLANTIC 10’ X 1/2” “Cost Cutter” Hydraulic Power Squaring Shear, s/n 14928, New 1982, Front Operated Power Back Gage, 60” Squaring Arm, Extra Blades

POWER PRESS BRAKE

• STEELWELD Model K5-10 Press Brake, s/n M1205, 350 Ton, 12’ Overall, 10’6” Between Housings, 12’ X 3/8” Capacity

POWER ROLL

• WEBB Model BR3-132 Pyramid Style Power Roll, 6’2” X 1/4” Capacity, 6 1/2’ Roll Diameter

HYDRAULIC IRONWORKER

• HAWTHORNE 90 Ton Hydraulic Ironworker, s/n 01749091, 6” X 6” X 3/8” Angles, Coper/Notcher, Misc. Punches and Dies

CNC FLAME CUTTING TABLE

• ESAB Model CSX-86 Flame Cutting Table, s/n 0051, Burny 2.5 CNC Control, (2) Oxy-Fuel Heads, Effective Cutting Area 8’ X 20’,

10’ Overall Torch Travel on Overarm

HORIZONTAL FORCING PRESS/BULLDOZER

• CHAMBERSBURG/AJAX Model L Horizontal Forcing Press/Bulldozer/Wheel Press, Estimated 300 Ton, 18’ Frame, Extra Frame Included

PLANER MILL

• LIBERTY Open Side Planer Mill, s/n 890, 75 HP DC Generator Drive, 52” X 168” Table, 50 Taper Vertical Milling Head, Side Head, 48” Vertical Travel of Arm, 96” Cross Travel of Mill Head on Arm

HORIZONTAL BORING MILL

• SUPERMIL Model J Horizontal Boring Mill, 2 1/2” Spindle, #4 MT, 027.5” X 35.5” Built in Rotary Table, 24” Spindle Travel, 30” Vertical Travel, 45” Table Travel, 42” Cross Travel, 3 Axis DRO

VERTICAL MILLS

• ATRUMP Model K4VY Vertical Mill, s/n K4VY-008, 4 HP, 40 Taper Spindle, 11” X 52” Table, Servo Feed in X and Y Axis, Power Drawer Bar, Newall DRO

• BRIDGEPORT Series I, 2 HP Vertical Mill, s/n 12BR224834, Power Table Feed, Chrome Ways

• ACRA Model CK-4HK Vertical Mill, s/n 761028, 3 HP, Sargon DRO, Servo Power Table Feed

• CINCINNATI #3 Vertical Mill, s/n 4J3V5C-8, 50 Taper, Sony 3-Axis DRO

• CINCINNATI #3 Vertical Mill, s/n 4J3V5D-26, 50 Taper, Sony 3-Axis DRO

UNIVERSAL MILL

• MECHANICY Model FWA-41M Horizontal Mill, s/n 93/63, Factory Vertical Head, Universal Table, Sony DRO, 15.75” X 78.75” Table

HORIZONTAL MILLS

• CINCINNATI #5 Horiz. Mill, 50 Taper, Overarm Support, Rapid Traverse, Factory Vertical Head

• CINCINNATI #5 Horiz. Mill, 50 Taper, Overarm Support, Rapid Traverse

RADIAL DRILLS

• CARLTON 6’ X 19” Radial Arm Drill, s/n 4A-2256, Box Table

• CARLTON 6’ X 19” Radial Arm Drill, s/n 4A-1066, Box Table

• RABOMA 4” X 11” Radial Arm Drill, 4’ X 11”, Box Table

4-POST HYDRAULIC PRESS

• HPM 4-Post Hyd. Press, 75 Ton, s/n 41-240, 29” X 48” Bed, 9” Stroke

SURFACE GRINDER

• MILLPORT 6” X 18” Hand Feed Surface Grinder, s/n 82-02545, Fine Pole Magnetic Chuck

WELDER/GENERATOR

• THERMAL ARC Predator Plus Welder/Generator, Gas, 220/110/1/60 AC

MIG WELDERS

• HOBART Fab Star 4030 Mig Welder, s/n 295WS12867, Hobart 2210 Wire Feeder

• HOBART Mega Flex 450 RVS Mig Welder, s/n 90WS08605, Hobart Dual Digital Wire Feeder

• THERMAL ARC Excel-Arc 8065 CC/CV Mig Welder, s/n 398PS18488, Thermal Arc 2410 Wire Feeder

• THERMAL ARC Excel-Arc 8065 CC/CV Mig Welder, s/n 398PS18402, Hobart Dual Digital Wire Feeder

• THERMAL ARC Excel-Arc CC/CV Mig Welder, s/n 92WS12016, Hobart Dual Digital Wire Feeder

• LINCOLN Idealarc DC600 DC Arc Welder, s/n AC514891, Lincoln LN8 Wire Feeder

TIG WELDERS

• LINCOLN Idealarc R3R-500 Tig Welder, s/n AC427510

• LINCOLN Idealarc R3R-500 Tig Welder, s/n Unknown

• LINCOLN Idealarc R3R-500 Tig Welder, Chiller

PLASMA CUTTER

• THERMAL DYNAMICS Pak Master 150XL Plasma Cutter, s/n 1407558

BAND SAWS

• START RITE Model HMB-400 Semi-Automatic Horiz. Band Saw, s/n 42145, 10” Capacity

• DO-ALL Model 16-1 Vert. Band Saw, s/n 48-54175, 16”, Blade Welder

• CAROLINA Model HV-12 Horizontal Band Saw, s/n HV13370

INDUSTRIAL BAND SAW BLADE WELDER

• LENOX Model TLH1500 Blade Welder, s/n 90716, 2” Capacity, 10 KVA @ 50%, Single Phase, Pneumatic Clamp, Auto. Advance/Retract, Lenox ASM 280-150B Controls

FORK LIFTS

• YALE Fork Lift, Est. 8,000 Lb. Cap/., LP, Solid Pneu/ Tire, 3-Stage Mast, 6’ Forks

• CLARK Fork Lift, Est. 5,000 Lb. Cap., Gas, Pneu/ Tire, 2-Stage Mast, Manual Transmission, 4’ Forks

• CLARK/ROSS Fork Lift, Est. 10,000 Lb. Cap., Gas, Pneu. Tires, Dual Front Tires, 2-Stage Mast, 6’ Forks, Enclosed Cab, Note: Unit not running

TRUCKS

• 1987 INTERNATIONAL Straight Bed Truck, 172,000 Miles,VIN 1HTLH0009GHA65565, Diesel, 24’ Bed with Steel Treadplate Deck, Manual Transmission, Single Axle

• 1997 FORD F350XL Stake Bed Truck, VIN 3FEKF37HXVMA34480, 120,000 Miles, Manual Trans., 12’ Bed with Steel Treadplate Deck, Dual Rear Wheels

• 1997 FORD F250 Pick Up Truck, VIN 3FTHF25H3VMA26320, 198,000 Miles, 8 Foot Bed

TOOLING, MACHINE ACCESS. & MISC. SHOP ITEMS

Mills, Drills, Reamers, Taps, Dies, 40 and 50 Taper Holders, Lathe Tooling, Lathe Chucks, Vises, Parallels, Fixtures, Large Quantity Steel Scrap, Steel Floor Plate, Bar and Tubing, Misc. Steel Pieces, Parts Machines, Steel Racks, Shelving, Welding Tables, Welding Supplies, Wire, Hose, Chain, C-Clamps, Rotary Tables, (2) Milwaukee Mag Drills, Large Quantity New Industrial Belts, Saw Blades, Abrasives, Grinding Wheels, Shop and Office Furnishings, Pallet Racking, Warehouse Shelving, Arbors, Ladders, Fans, Fly Cutters, Boring Heads, Jacobs Chucks, Centers, Self Dumping Hoppers, Hand Tools, Power Tools, Air Tools, Hardware, Building and Machine Maintenance Items, Come-a-Longs, Straps, Binders, Electric Motors, Many other Items!!

REAL ESTATE: CAMBRIDGE MACHINE & SUPPLY CO.

For sale by Private Negotiation, 29,309 Sq. Ft. Industrial Building, Fenced Lot, Office Area, Electric Cranes, 3-Phase Throughout, Ground Level Doors, Easy Access to I-70.

For Further Information call: David Ogle, Scott-Ogle Realty, Inc., 74-432-7333