Ingersoll Rand

MICROTURBINE GENERATORS

• Ingersoll Rand Powerworks Model 70LM Microturbine Generator, s/n PW00213D02065, New 2002, Natural Gas Fired, 85.3 BTU/Hr., 70 kW Nominal Power Output, 110 A Nominal Amperage, 98 kW Max. Power Output, 70 dBa, PLC Control

• Ingersoll Rand Powerworks Model 70LM Microturbine Generator, s/n PW00205D0102, New 2002, Natural Gas Fired, 85.3 BTU/Hr.,  70 kW Nominal Power Output, 110 A Nominal Amperage, 98 kW Max. Power Output, 70 dBa, PLC Control

• Ingersoll Rand Powerworks Model 70LM Microturbine Generator, s/n PW00212D02059, New 2002, Natural Gas Fired, 85.3 BTU/Hr., 70 kW Nominal Power Output, 110 A Nominal Amperage, 98 kW Max. Power Output, 70 dBa, PLC Control

• Ingersoll Rand Powerworks Model 70LM Microturbine Generator, s/n PW00216D02064, New 2002, Natural Gas Fired, 85.3 BTU/Hr., 70 kW Nominal Power Output, 110 A Nominal Amperage, 98 kW Max. Power Output, 70 dBa, PLC Control

CNC TURNING CENTERS

• Hardinge Conquest Twin Turn 65 CNC Turning Center, s/n TT-142, Fanuc 18i-T CNC Control, Twin Turret, (10) Tools Per Turret, Sub Spindle, Milling, 16.5” X Axis Travel, 28” Z Axis Travel, Master Collet Nose on Each Spindle, Chip Conveyor, Large Compliment Tool Holders, Including Live Holders, Tool Setter

• Hardinge Conquest 42 CNC Turning Center, Fanuc 0-T CNC Control, Live Milling, Sub Spindle, Master Collet Nose on Main Spindle, 3-Jaw Chuck on Sub-Spindle, Parts Catcher, HarMatic Bar Feed, Tool Presetter, 10.8” Max. Turning Diameter, 5.45” X Axis Travel, 13.65” Z Axis Travel, 1.625” Cap., 10 Tools, 5 Live Positions

• Hardinge Conquest 42 CNC Turning Center, Fanuc 0-T CNC Control, Live Milling, Sub Spindle, Master Collet Nose on Main Spindle, 3-Jaw Chuck on Sub-Spindle, Parts Catcher, HarMatic Bar Feed, Tool Presetter, 10.8” Max. Turning Diameter, 5.45” X Axis Travel, 13.65” Z Axis Travel, 1.625” Cap., 10 Tools, 5 Live Positions

• Hardinge Cobra 42 CNC Turning Center, s/n C-376, Fanuc 21T CNC Control, Chucker, Master Collet Nose, 8.75” Max. Turning Diameter, 7.75” X Axis Travel, 14” Z Axis Travel,1.625” Cap., 12 Tools

• Haas HL-2 CNC Turning Center, s/n 60684, New 1997, Haas CNC Control, 20” Swing, 24” Centers, Master Collet Nose, Tailstock, Tool Presetter, Parts Catcher

• Daewoo Puma 6S CNC Turning Center, s/n PM6S-0201, Fanuc 16-T CNC Control, 1.5” Capacity, 14.2” Max. Turning Diameter, 7.9” X Axis Travel, 15” Z Axis Travel, 15 HP, 12 ATC

• Leadwell LT-10 CNC Turning Center, s/n L2SIG0508, Fanuc 0-T CNC Control, 9.8” Max. Turning Diameter, 19.6” Max. Swing, 13” Centers, 10 HP, 12 ATC, 1.625” Capacity, 6” 3-Jaw Chuck, Tailstock, Tool Presetter

• Jones & Lamson Model TNC-A 4-Axis CNC Chucker, s/n 578712, CNC Engineering/Fanuc 0-T Retrofit, Misc. Tooling and Chucks

• Jones & Lamson Model TNC-A 4-Axis CNC Chucker, s/n 578350, Fanuc 0-T CNC Retrofit, Misc. Tooling and Chucks

• Jones & Lamson Model TNC-A 4-Axis CNC Chucker, s/n 578462, CNC Engineering/Fanuc 0-T Retroift, Misc. Tooling and Chucks

• Jones & Lamson Model TNC-4515 4-Axis CNC Chucker, s/n 235617, CNC Engineering/Fanuc 0-T Retrofit, Misc. Tooling and Chucks

CNC VERTICAL MACHINING CENTERS

• Monarch Model VMC-75B CNC Vertical Machining Center, s/n 94007, New 1994, Fanuc 15-M CNC Control, 40” X 20” X 24” Travels, 50 Taper, 40 ATC, 25 HP, Chip Conveyor

• Fadal Model VMC-15 CNC Vertical Machining Center, s/n 9311182, New 1993, Fadal CNC 88HS CNC Control, 20” X 16” X 20” Travels, 29.5” X 16” Travels, 10 HP, 40 Taper, 16 ATC

CNC VERTICAL MILL

• Bridgeport Explorer 3-Axis CNC Vertical Mill, Bridgeport DX-32 CNC Control, 3 HP, Quick Change Spindle, 12.5” X 34” Table Working Surface, 18” X 12” X 5” Travels, 14.5” Knee Travel, Power Drawer Bar

CNC WIRE EDM

• Sodick Model A320D CNC Wire EDM, s/n 1-6739, New 1995, Sodick Fine EX21 CNC Control, 40 Amp, 4-Axis, Auto Wire Thread, Taper Cut, Max. Workpiece Size 21.2” X 14.1” X 6.8”, Travels 12.5” X 8” X 10.6”, Dielectric Tank, Chiller

CNC INDEXERS

• Haas Trunion Style 4th-5th Axis CNC Indexer, 8” Face Plate

• Haas 5C CNC Indexer with Haas Servo Controller

• (2) Haas Servo Controllers

• Hardinge 5C CNC Indexer with Servo Controller

• Hardinge Servo Controller

• (2) Yuasa CNC 4th Axis Indexers, 10” Face Plates

ROTARY SURFACE GRINDER

• Blanchard Model 20D-36” Rotary Surface Grinder, s/n 12267, Rebuilt 2003, 20” Wheel, 36” Electro-Magnetic Chuck, 30 HP, Dry Based Machine with Paper Filtration Coolant System

UNIVERSAL ID/OD GRINDER

• Kellenberger Model 600U Universal ID/OD Grinder, s/n 613469, 14” X 24”, Swing Around ID Attachment, Filtration Coolant, 8” 3-Jaw Chuck, Hydraulic Table, Auto. Infeed

INTERNAL GRINDERS

• Heald Model 273A Internal Grinder, s/n 39245, Sine Bar Attachment,10” 3-Jaw Chuck, Wheel Dresser, Push Button Controls, Coolant, ID Spindle, 24.5” Swing, 18” Stroke

• Heald Model 272 Internal Grinder, s/n 40756, Sine Bar Attachment, Collet Nose, Wheel Dresser, Coolant, ID Spindle, 22” Max. Swing

JIG GRINDER

• Moore #3 Jig Grinder, s/n G119, Moore Grinding Head, Moore Rotary Table

AUTOMATIC SURFACE GRINDER

• Elb Model SWN9VA-II Automatic Surface Grinder, s/n 165241279, 16” X 36” Capacity, 3-Axis, Coolant, Over the Wheel Dresser, Magnetic Chuck

SHOT BLAST MACHINE

• Wheelabrator 72” Shot Blast Machine, s/n A100087, 72” Door Mount Rotary Table, Dust Collector, Elevator Reclaim System, Controls

PARTS WASHER

• Hurricane Model 5018 Multi-Stage Parts Washer, s/n 4529, New 1992, Pass-Thru Style, 8” X 16” Parts Opening, 6” Wide Conveyor, Skimmer, Outfeed Conveyor, Solid State Controls

HEAT TREAT DEPARTMENT

• Surface Combustion “Allcase” Model Super 30-48-30 Internal Quench Convection Oven, s/n SNBO-40497-1, Electric, Top Cool, 30” X 30” X 48” Chamber, 1,750 Max. Temperature, SBS Chiller, Controls, Max. Power

• Surface Combustion “Allcase” Super Power Gas Internal Quench Convection Oven, s/n BC-41841-1, Gas, Top Cool, 30” X 30” X 48” Chamber, 1,750 Max. Temperature, SBS Chiller, Controls

• Surface Combustion “Allcase” Super Electric Internal Quench Convection Oven, s/n BC-41806-1, 30” X 30” X 48” Chamber, 1,750 Max. Temperature, SBS Chiller, Controls

• Surface Combustion Electric Tempering Furnace, s/n BC-41807-1, Max. Temperature 1,400, Max. Power Requirement 81 kW

• Surface Combustion Model WWD-30-48-30 Electric Washer, s/n BX-41781-1, Temperature Range 160 to 180 Degree, Controls

HYPOID GEAR GENERATOR

• Gleason No. 106 Hypoid Gear Generator, Helical Motion, s/n 65913, 8.5” pitch dia., up to 4DP, 0.500” full depth, 5 to 97 teeth, 1.250” face, hydraulic power work clamping cylinder, completing cam, large quantity change gears

GEAR HOBBERS

• Barber Coleman Model 16-16 Gear Hobber, s/n 2936, 16” Max. Work O.D., 16” Max. Hob Slide Travel, 6” Diameter Pitch Max., Helix Angle Max. 45º L to R, 5-600 Teeth, 5” Hob Diameter and Length

• Barber Coleman Model 6-16 Multi Cycle Gear Hobber, s/n 5165, 6” Max. Work O.D., 16.5” Max. Hob Slide Travel 6” Diameter Pitch Max., Multi Cycle Controls, Hob Rotation, 180º Turret, Hob & Work Slide Selector

GUN DRILL

• Dehoff 2-Spindle Gun Drill, s/n DH1379, Est. 1/2” X 18” Cap., 3 HP, High Pressure Coolant, Controls, w/ (2) Wisconsin 2-Spindle Drill Fixture Attach.

PRECISION TOOL AND CUTTER GRINDER

• Deckel Model S11 Precision Tool and Cutter Grinder, s/n 1626, New 1992, Adjustable Through 360 Degree in 5-Axis, Large Number Attach./Access.

TURRET LATHE

• Warner & Swasey #4A-1500 Saddle Type Turret Lathe, 8 1/4” Spindle Bore, 25 HP, 28 1/4” Swing Over Bed, 92” Max. Center Distance, Power Chuck Driver, Power Longitudinal and Cross Feed Turret, 6-Position Turret, Way Covers

ENGINE LATHES

• Monarch Model 1610 X 30 Engine Lathe, s/n 44604, 16” X 30” Capacity, 1,500 RPM, D1-6 Spindle Nose, Jacobs Collet Nose Attachment

• Monarch 15.5” X 30” Engine Lathe, s/n 41743, 1,000 RPM, D1-6 Spindle Nose, Jacobs Collet Nose Attachment

SPLINE MILLS

• Townsend M80 Duplex Spline Mill, s/n 640 5.25” X 30” Table, 2” Cutting Depth Per Spindle

• Townsend M80 Duplex Spline Mill, s/n 2167, 5.25” X 30” Table, 2” Cutting Depth/Spindle

VIBRATORY FINISHERS

• Sweco Model FMD-24LR Vibratory Finisher, 24 Cubic Ft., 73” Bowl Diameter, 17” X 18” Channel, Parts Separator, Controls, Timer, Cover

• Sweco Model FMD-14LR Vibratory Finisher, 14 Cubic Ft., 69” Bowl Diameter, 14” X 14” Channel, Parts Separator, Controls, Timer, Cover

• Roto-Finish Spiratron Extended Range Series Vibratory Finisher, s/n ER0405BC-90-A32, Est. 5 Cubic Foot, Separator Ramp, Controls, Timer, Wet-Based Machine, Cover

• Roto-Finish Spiratron Extended Range Series Vibratory Finisher, s/n ER-0203BC-91-C5, Est. 5 Cubic Foot, Separator Ramp, Controls, Timer, Magnetic Separator, Cover

• Roto-Finish Spiratron Extended Range Series Vibratory Finisher, s/n ER-0405BC-90-A35, Est. 5 Cubic Foot, Separator Ramp, Controls, Timer, Cover, Wet-Based Machine

TOOL ROOM MACHINERY

• Bridgeport Series I, 2 HP Vertical Mill, s/n 12BR273527, 9” X 48” Table, Power Table Feed, Accurite D.R.O.

• Bridgeport 1 HP Vertical Mill, s/n 12537, Round Over Arm Style

• Tree Model 2UVR Vertical Mill, 1 1/2 HP, Factory Table Feed

• Cincinnati #2ML Horizontal Mill, s/n 5J2P1U-3, 50 Taper, 1,500 RPM, Accurite D.R.O.

• Cincinnati #2ML Horizontal Mill, s/n 5J2U1Y-5, 50 Taper, 1,500 RPM, Power Take Off Attachment

• Dennison Multipress C-Frame Hydraulic Press, 8 Ton, s/n 5879

• Delta Rockwell Single Spindle Drill Press, Model 70-400, Power Feed Quill

• Allen Single Spindle Drill Press

• Noblewest Model 60 Parts Marker, s/n 6058, Manual/Automatic Controls

• Hardinge Model HC Chucker

• Hardinge Model DV-59 Second Operation Lathe, Bench Top

• Norton Tool and Cutter Grinder, s/n 7187, Motorized Workhead

• Famco #5S Ratchet Type Arbor Press, Floor Model

• Greenerd #55 Arbor Press

TESTING AND METALLURGICAL MACHINERY

• New Age “Indenton” Model NI-300C Digital Hardness Tester, s/n 971870

• Wilson Tukon Micro Hardness Tester, s/n 821, Microtron Scale, Baush and Lomb Scope

• Olympus Model PME Inverted Metallurgical Microscope, Camera, Lenses, Attachments

• Wilson Rockwell Model 5JR-R8 Hardness Tester, s/n 1554

• Wilson Rockwell Model 5JR-R8 Hardness Tester, s/n 1907, Tooling

• Wilson Rockwell Model 4JS Superficial Hardness Tester

• Wilson Rockwell Model 4JS-BB Superficial Hardness Tester, s/n 1299

• Wilson Rockwell Portable Hardness Tester, Wood Case

• New Age Model BR30 Dyna Brinell Hardness Tester, s/n 453

• Tinius Olsen Model 90200-4 Tensile Tester, s/n 90200-4, 60,000 Lb. Cap.

• Unitron Model AE-1 Automatic Exposure Unit

LABORATORY MACHINERY & EQUIPMENT

• Buehler Model 10-1000-460 Abrasive Cutoff Saw, Wet Type, s/n 336-A-1695, 10”

• Buehler Simplimet II Mounting Press, Model 20-1320-115, s/n 353-NS-2786

• Buehler Ecomet V Grinder/Polisher, Model 49-1685-160, s/n 383-ECV-560, Twin Wheel

• Leco Model EP-50 Electro-Polisher

• Labonco Lab Hoo

• Blue M Elec. Lab Oven, Model SW17TA, s/n YA9875, Electric, 200º Max.

PALLET RACKING

• (66) Sections Total, Each 16’ Height, 93” Width, 45” Depth, Majority of

Sections with (4) Openings Per Section, Metal Decking Flooring

CARDBOARD BALER

• Philadelphia Tramrail Cardboard Baler s/n 91B6919, 30” X 36” X 60” Bale Size

MISCELLANEOUS MACHINERY

• (6) Koolant Koolers Coolant Chillers, Models HCC1000-HAR-8GPM, New in Box

• Colonial Model RC-72 Broach Grinder, s/n M-11217, 10” X 72”

• LaPointe Broach Grinder, with Walker 4” X 30” Sine Mag. Chuck

• Gleason Model 107 Hob Sharpener, s/n 28655

• Gleason Bevel Gear Checker (Hard Gear)

• Powerwave Plus Model 36/24 Uninterruptable Power Supply, s/n BK333A0414

• Leibert System 3 Computer Room Air Conditioning Unit

• Anderson Hydraulic Straightening Press, Est. 15 Ton, Misc. Tooling

• Telesis Model TMP-6000 Pin Stamp Parts Marker, s/n 6744, PC with Operating Software

• Ingersoll Rand Model T-30 Air Compressor, 3-Stage, s/n 495270, 20 HP

• Parker Parkrimp 1 Crimping Hose Machine, with Dies

• Ensley Model 666 Elec. Pipe Bender, w/ B17012 Head and B17013 Head

• Hanson-Whitney Model 10X24 Thread Mill, s/n 252

• BTM Pneumatic Insert Press, Model P-2-B X 2.25 TE100, s/n C012, 2 Ton

• Air Hydraulic Model C-250 Press, s/n 2405, Est. 2 Ton Capacity

• Dennison Model A Bench Top Hydraulic Press, 1 Ton, s/n 5/20/60

• Dennison Model A Bench Top Hydraulic Press, 1 Ton, s/n 8308-A20-G3

• Gray Mills Clean-o-Matic Parts Washer

• Ramco Parts Washer, Lifter and Timer

• Ingersoll Rand Model N2G17FP Nitrogen Generator, s/n A04J14097

• Barker Horizontal Hand Miller

• Custom Made Machinery, Several Items Available

• Pedestal Grinders and Sanders, Several Available

• (3) TASC Master Aqueous Cleaning Systems

• Balcrank Jet Pulser High Pressure Coolant System, Model TDM(8)

• Ingersoll Rand Model BW035080 Z-Brake Air Balancer, 350 Lb. Cap.

PACKAGING & SHIPPING MACHINERY & EQUIPMENT

• Halton Model EH-500 Rotary Shrink Wrap Machine, s/n 97561, 4’ X 4’ Turn Table, Built in Scale with LED Display

• Signode Model HB-4300SF Power Strapping Machine, 15.75” X 9.84” Chute, New 2006

• Signode Model HBX4300 Power Strapping Machine, 15.75” X 9.84” Chute, New 2008

• Storo Pack Air Plus Excell Air Bagging/Cushioning System, s/n XL-01/1280-1874

• GSE Electric Floor Scale, LED Display

• GSE Bench Top Counting Scale

FORK LIFTS & MATERIAL HANDLING

• Clark Model TW25B Electric Fork Lift, s/n TW125-342-391, 2,500 Lb. Cap., 3-Wheel, 2-Stage Mast, Non-Marking Tires

• Clark Prime Mover Elec. Walk Behind Fork Lift, Model SP30, s/n 13-2024, 3,000 Lb. Cap.

• BT/Primemover Model WRX30 Walk Behind Elec. Fork Lift, s/n WRX3032224002, 3,000 Lb. Capacity

• (3) Presto Electric Scissor Lift Tables, 1,500 Lb. Capacity

• MTC Battery Cart

CNC BOARDS, MOTORS, DRIVES, ETC.

• CNC Boards, Many Appear New, Including Fanuc #A16B-1210-0481/02A, #A16B-01210-0480/02A, #A16B-1200-0150/01A, #A16B-1000-0030/R, #A16B-1700-0200/06A, #A16B-2202-0860/R, #A20B-0008-0461/04A, #A20B-0007-0360-03A, #A20B-0009-0320-05B, #A20B-007-036, #A20B-0008-043, #A20B-0007-0030-02A, #A20B-0008-0540/01A, #A20B-1003-0090/02, #A20B-0007-0040/03A, #A20B-0007-0004/04A Okuma #E4809-770-035, #E4809-045-088-B, #A099-3100-01010, #E4809-770-033-1

• Mitsubishi Meldas Servo Amp Boards, #MR-S11-300-E01, #MR-S11-100-E01 (Qty. 2); Okuma Servo Amp Board #1006-0613-77-50; Fanuc Servo Amp Boards #A06B-6058-H006, #A06B-6058-H004, #A06B-6045-H005/H006 (Qty. 2), #A06B-6058-H334, #A06B-6058-H223/R, #A06B-6058-H334/R

• Okuma Drive Unit, #U7950-006-018R; Monarch Axis Drive, #AD-018-185-A; Fanuc Power Supply #A06B-6087-H126, Power Supply #A14L-0102-0001/A, Spindle Servo Unit A06B-6059-H206, Velocity Control Unit #A06B-6047-H002, Power Supply #A14B-0061-B001, Velocity Control Unit #A06B-6047-H004; ABB Model ACS 400 AC Drive

• Fanuc 18M Monitor and Key Pad, Fanuc AC Spindle Servo Unit #A06B-6055-H208

• Fanuc Servo Motors #A06B-0371-B175, #A06B-0314-B006-R, #A06B-0314-B003, #A06B-0512-B001, #A06B-0512-B004, #A06B-0502-B002-R, #A06B-0614-B032, #A06B-0642-B012, #A06B-0314-B043-R, #A06B-0314-B041/0075, #A06B-0642-B002, #A06B-0642-B005

• Fanuc AC Spindle Motor, Model 6S, #A06B-0754-B600

• Plus Many Additional Items

TOOLING, MAINTENANCE, MISC. SHOP ITEMS

• (3) Large Lots, Bearings (New in Box, Including Precision Bearings, Various Sizes); Motor Starters, Limit Switches, Overloads Limit Switches, Fuse Blocks, Push Button Controls, Electric Eyes, Prox Switches, Pressure Switches, Plugs, Fuses, Transformers, Air Cylinders, Lube Pumps, Filters, Valves, Coolant Pumps, Large Quantity Electric Motors, Gear Motors, Steel Way Covers, Ball Screws, (5) Ingersoll Rand IC-D Controllers (New), (2) Saftronics AC Drives, AC Tech. Intelligent Drive, SKF Model TIH020 Bearing Heater, (4) Enerpac Actuators, I/R Pneumatic Hoists, Hand Tube Benders, Hand Tools, Power Tools, Air Tools, Torque Wrenches,

• Honda 5 HP Trash Pump, Conveyor, Pedestal Fans, Yellow Bellied Sump Sucker, Heat Treat Baskets, Alnor Dew Pointer, SSI Dew Point Analyzer, Bacharach Electronic Gas Analyzer, (3) SSI Gold Probe Carbon Sensors, Vertex Water Cooler Royal Filtermist, Carts, Pallet Jacks, Self Dumping Hopper, Warehouse Steps, (2) Ruger Hyd. Lifts, Workbenches with Vises, Barrell Carts, 4-Drawer

• Cabinets, Metal Upright Cabinets, Lateral Files, Office and Shop Furniture, Die Carts, Dayton 1 Ton Wall Mount Jib Crane, (7) Oil Carts, With Pumps, (6) Vidmar Tool Cabinets, Allsteel 2-Door Safe, (15) Fire Proof Cabinets, Metal and Wood Skids, Parts Baskets, Cardboard, Oily Rag Cans, Floor Scale, (40+) APC Battery Back Ups, Magtrol Dynamometer, Lockers, Defilbech Automated External Defibrillator, Physio-Control Lifepak 500 Defibrillator, Physio-Control Lifepak 12 Defibrillator, Welch Allen Otoscope, Essilor Digital Pupillometer, ESD Oxygen Analyzer, Wheel Chair, (2) Adjustable Exam Chairs, Albany Rapid Roll Power Door (10’6” X 10’6”, Frame Work), Contents of Medical Office, (2) Chip Pan Dumping Systems, Hoshizaki Model DCM-500BAH-OS Ice Maker, Many Other Items!!