J & G Welding and Maintenance, Inc.

POWER SQUARING SHEAR
• Adira Model GHO-0630 Hydraulic Power Squaring Shear, s/n 1223/3732, New 1985, 10’ X 1/4” Cap., Quick Set Blade Adjustment, 40” Front Operated Power Back Gage, 42” Squaring Arm, (2) Front Sheet Supports with
Disappearing Flip Stops
HYDRAULIC PRESS BRAKE
• Amada Model RG-80 Hydraulic Press Brake, s/n 804387, Upacting, Hurco Autobend 7 CNC 2-Axis Back Gage, 88 Ton, 6’6” Overall,
5’ Between Housings
CNC TURRET PUNCH
• Amada Model Octo-303040 CNC Turret Punch, s/n 3340078, New 1983, Fanuc 6MB CNC Control, 33 Ton, 8 Station, 3 1/2” Standard Head w/ Adaptors for 2” and 1 1/2”, (2) Alignment Tools, 29.928” X 39.37” Nominal Capacity, 29.928” X 78.74” Capacity with Repositioning, Max. Sheet Thickness 1/4”, 300 SPM Max. (150 SPM on 1” Centers), 1,575 IPM Feed Rate
HYDRAULIC IRONWORKER
• Geka Hydracrop Model 110A Hydraulic Ironworker, s/n 15613, New 1995, 120 Ton, 6” X 6” X 5/8” Angles, Flat Shear 5/8” X 24” or 3/4” X 16”, Dual Foot Pedals, Production Pkg., Oversize Die Holder, Misc. Punches and Dies
SINGLE STATION PUNCH
• Amada Model D-750 Single Station Punch, s/n 701981, New 1980, 33 Ton, ¼” Max. Material Thickness, 200 SPM, Max. Template Size 47.24” X 29.52”, Quick Change Holder (3” and 1 1/2” Capacity), Anilam DRO
HYDRAULIC NOTCHER
• Amada Model CS-220 Hyd. Notcher, s/n 543845, 8” X 8” X 1/8” Cap., Foot Pedal
HYDRAULIC BENDERS
• Bendhor Model 30 Horizontal Hydraulic Tube Bender, s/n 1040, New 1996, 33 Ton Capacity, 25” X 43” Table, 38” Working Height, 8” Ram Travel,
3/4” X 4 3/4” Flat Bar Bending Capacity, 2” Max. Tube Bending Capacity,
Misc. Dies, Tandem Hydraulic Pump for Fast Approach and Slow Bend, CNC Gaging System
• Carell Eurekamatic Hydraulic Ornamental/Ironwork Tube Bender, s/n 0411, New 2001, PLC Control with Storage up to 45 Jobs, Rotary Bending Head,
1” Round Capacity, 5/16” X 4” Flat Capacity
AUTOMATIC HORIZONTAL BAND SAW
• FMB “Jupiter” Automatic Horizontal Band Saw, s/n F01166, New 2004, Mitre Cut Capabilities, 10” Round Cap., 1” Blade, PLC Control, In Feed Conveyor
PASS THRU DEBURRING AND POLISHING MACHINE
• Amada Model DB-610 Deburring and Polishing Machine, s/n 61000307, 24” Max. Part Width, 6.5” Min. Part Width, Work Piece Thickness
.01” - .177”, Equipped with Amada Model DB-25 Dust Collector,
Variable Speed Belt Drive
DEBURRING MACHINE
• Falls Model 111 Deburring Machine, 24 Gauge Minimum Part Thickness, 1/4” Maximum Part Thickness, 1/2” Minimum Part Width, 4” Minimum Part Length, 60 FPM Feed Rate
CORNER RADIUS NOTCHER
• Roper Whitney “Pro-Fab” Model 900 Corner Radius Notcher, s/n 222-6-90, 16 Gauge Capacity
COLD SAW
• Doringer Model D350 Cold Saw, s/n 20278, 14” Blade, (2) Pneu. Vises, 2-Speed Motor, Coolant 4.75” Tube Capacity
CNC VERTICAL MACHINING CENTER
• Milltronics Model MC-20 CNC Vertical Machining Center, s/n 4785, Centurian 6 CNC Control, 40” X 20” X 20” Travels, 40 Taper, 20 ATC,
16” X 54” Table, Machine Can Be Run Manually or CNC
CNC VERTICAL MILL
• Chevalier Model FM-3KVH Vertical Mill, s/n HP845013, Retrofitted with Prototrak M2 CNC Control, 2-Axis, 10” X 50” Table, 3 HP, R8 Spindle,
Power Drawer Bar
VERTICAL MILL
• Jet 3 HP Variable Speed Vertical Mill, s/n 2040195, Newall DRO, Power Table Feed, 10” X 50” Table
TOOLROOM LATHE
• Lelbond Regal “Servo Shift” Toolroom Lathe, s/n 10C262, 15” X 60” Approx. Capacity, Inch/Metric, 10” 3-Jaw Chuck, Steady Rest,
Trav-A-Dial, Tool Post, Face Plate, 5C Collet Attachment
SURFACE GRINDER
• Hammond/Abrasive 6” X 18” Hand Feed Surface Grinder, 6” X 12” Mag. Chuck
SPOT WELDER
• Kimura Model SW605 Spot Welder, s/n 20326, New 1989, 60 KVA, 30” Throat, Solid State Control, Includes 400 Amp Disconnect Box
PLASMA CUTTER
• Thermal Dynamics Pak Master 50 Plasma Cutter
MIG WELDER
• Miller Millermatic 200 Mig Welder, s/n KB014271, Built in Wire Feeder
AMADA PRESS BRAKE TOOLING
• Large Qty. Amada Press Brake Dies, Both Standardized and Sectionalized, Various Lengths of Angles, Bed Plates, Die Holders, Riser Filler Blocks, etc.
MISCELLANEOUS TOOLING AND SHOP SUPPORT ITEMS
• Punches & Dies, Kurt Vises, Mill & Drill Vises, 40 Taper Holders, Collets, CNC Collets, End Mill Holders, Mills, Drills, Reamers, Taps, Dies, 5C Indexers, Dressers, Stock Stands, Welding Accessories and Supplies, Heavy Duty Steel Welding Table, Parts Carrousel, Wheel Balancers, Fans, Ladders, Ridgid Die Stands, Hand Tools, Power Tools, Air Tools, Hardware, Casters, Building and Machine Maintenance Items, C-Clamps, Horses, Welding Wire, Welding Leads, Die Tables, Abrasives, Saw Blades, Huot Drill Cabinet, Chain, Air Vises, Paint Supplys, Aro Pneumatic Paint Pump with 24” Impellor, Yuasa Super Spacer, Shop Furnishings, Spare Parts, Lista Style Tool Cabinets, Upright Metal Cabinets, Beam Trolleys, Chain Fall Hoists, Lever Hoists, Many Other Items!
PNEUMATIC TOOLS
• Jackhammers, Chipping Hammers, Vertical Grinders, Vertical Sanders, Horiz. Grinders, Angle Grinders, 1/2” to 1” Impact Wrenches, Ratchet Wrenches, Hoists, Pistol Drills, Cable Winches, Air Hammers, etc., Large Quantities!