Morris Site Redevelopment

Details

Click on any image to view larger.

OMAV BILLET SAWS

• OMAV Billet Saw Model 131/B, 44” Blades, 52” Width Table, Dual Clamp Down, S/N 37-98, W/ Omav Power Feed Conveyor Model 140, 48” X 55” Belt, Plc Controls.

• OMAV Billet Saw Model 060, Mounted On A Rail With 120’ Of Travel, S/N 25-98, 44” Blade, Plc Controls.

• OMAV Model 063 Trim Saw, S/N 26-98 Approx. 24” Blade.

OVERHEAD CRANES

(MOST OVERHEAD CRANES ARE TOP RUNNING & SELL WITH LONG PORTIONS OF RUNWAY)

• Zenar 10 Ton Overhead Crane, 62.5’ Wide, Double Girder, (2) 5 Ton, Independent Hooks, S/N 8100. Remote Control & Pendant Control (Rc & Pc)

• Illinois 10 Ton Overhead Crane, (2) 5 Ton Simultaneous Hooks, Double Girder, 68’ Span, (Rc & Pc).

• Electro Corp. 30 Ton, Double Girder With (2) 5 Ton Hooks, Rc & Pc.

• Krone 10 Ton Double Girder, Dual 5 Ton Simultaneous Hooks, 60’ Span.

• (4) 10 Ton Double Girder Overhead Cranes Each With (2) 5 Ton Independent Hooks, Pendant Control,

• Electro 10 Ton, Double Girder, Overhead Crane, 72’ Span, (2) 5 Ton Independent Hooks, Rc & Pc.

• P & H 20 Ton Overhead Crane, Dual 10 Ton Simultaneous Hooks, 67’ Span.

• (2) Superior 20/5 Ton Overhead Cranes, Double Girder, With 20 Ton & 5 Ton Independent Hooks, Approx 55’ Span.

• Numerous P & H, Conco, & Other Overhead Cranes Ranging From 5-10 Tons, Double Girder, 5 Ton Hooks, 25-60’ Spans.

• Free Standing Overhead Cranes, Jib Cranes, Etc.

SPREADER BARS

• Caldwell 25S-5-50 Spreader Bar, 10,000 Lb Capacity, 50’, 4010 Lbs.

• (2) Caldwell 25S-7-5-30 Spreader Bars, 15,000 Lbs. Capacity, 30’, 2940 Lbs.

• (3) Caldwell Model 25S-5-358.5 Spreader Bar, 10,000 Lbs. Cap. 30’, 2320 Lbs.

• (2) Caldwell Model 25S-5-178 Spreader Bars, 10,000 Lb. Cap. 15’, 1320 Lbs.

• (9) Various Spreader Bars, 10-15,000 Lbs. Capacities, 9-12’ Lengths.

SWITCH GEAR**INTERRUPTION SWITCHES**TRANSFORMERS

• HVL Square D Load Interrupter Switch Model 44036-325-50, 13200 Volt With Square D Transformer, 3750 KVA, 13,200 High Volt, 480Y/277 Low Volt With (4) 5000 Amp Square D Power-Zone Iii Switch Gear Units With Power Logic Circuit Monitor. “S”

• HVL Square D Load Interrupter Switch Model 44036-325-50, 13,200 Volt With Square D Transformer, 3750 KVA With 13,200 High Volt & 480Y/277 Low Volt, & (3) 5000 Amp Square D Power Zone Iii Switch Gear Units With Square D Power Logic Monitor: “T”

• GE Load Interrupter Switch, 13,800 Volt, 600 Amp W/ GE Transformer 1500 Kva, 13,200 High To 480 Low Voltage & GE Akd-8 Switch Gear. “R”

• Westinghouse 13,200 Volt Interrupter Switch W/ 1500 Kva Transformer, 13,200 High & 480Y/277 Low Volt, With Main Breaker & 7 Smaller Switch Gear Units. “E”

• GE 13,200 Interrupter Switch, 600 Amp W/ 1150 Kva Transformer, & Ge Akd-8 Switchgear, “M”

• Westinghouse Interruption Switch W/ 1150 Kva Transformer, 13,200 High & 480Y/277 Low Volt, & Westinghouse Switchgear. “K”

• Westinghouse Interrupter Switch, Max 15,000 Volts, 600 Amp, 1500 Kva Transformer & Westinghouse Switchgear. “B”

• ABB Interrupter Switch, 13,200 Volt, 1500 Kva Trans, 13,800 High, 480Y/277 Low, (6) Ge Switchgear Units. “H” Up On Mezzanine.

• Numerous Other Switchgear Stations Of Various Configurations.

FURNACES & AIR ROTATION UNITS

• (3) Belco Furnaces, Car Bottom Type, 11’ 6” Wide X 9’ Tall Opening With Rr Track For Carbottom Steel Carts, 10 Million Max Btu Per Hour, (4) 25 Hp Top Mounted Circulation Fans. (35) Steel Car Bottom Furnace Carts, 14’ Long By 9’ Wide, 6’ Wide Railway Wheels.

• (4) Johnson Warehouse Heating Units & Air Rotation Units, Model Ar-85-5Sdp-7.5-Lhog, Natural Gas, New 1999.

MACHINE SHOP

• Micro-Vu Vertex 310 Vision Measurment System W/ Omega Om-5000 Data Logger, Joystick Control, 12” X 12” X 6” Measuring Capacity.

• Blanchard Model 11-16 Rotary Surface Grinder, S/N 14508, 16” Chuck.

• Verson H-Frame Hydraulic Press, 75hp, Sliding Bed

• American 20” X 36” Hd Engine Lathe, 3-Jaw Chuck, Steady Rest

• Doall Model 2013-V, 20” Vertical Bandsaw, S/N 500-981837, New 1998.

• Cincinnat Model 205-10 Horizontal Mill With Vertical Head Attachment.

• Hammond Double End Carbide Grinder Mdel Wd-6. Baldor 7” Pedestal Grinder.

• Dumore Tool Post Grinder.

AIR COMPRESSORS

• Sullair Model TS20-200HWCAC Rotary Screw Compressor, 200hp.

• Sullair Model TS-20-200H WCAC Rotary Screw Compressor, 200hp

• Sullair Model SRD-1000-WC Refrigerated Air Dryer

• Ingersoll Rand Model SSR-EPE-300-25, 300hp Rotary Screw Compressor, 1476 CFM, 125 PSIG, 86,000 Hours, S/N EE1798U99081. Intellisys PLC Control.

• Gardner Denver Compress Air Dryer model RSD2000A4

• Ingersoll Rand Model TM1400-T, Refrigerated Compressed Air Dryer, New 1999.

CATERPILLAR DIESEL GENERATOR

• Caterpillar Diesel Generator Used For Fire Protection System, 3208, 235Hp, 175 KW.

MISCELLANEOUS EQUIPMENT AND MACHINERY

• Parts Room Accessories, Parts, Conduit Fittings, Pneu. & Hyd. Fittings, Parts Room Shelving, 50 Sections Of Pallet Shelving, Toledo Floor Scale With Led Display, Signode Series 500 Automatic Stretch Wrapping Machine; Signode Auto Strapping Machine; (3) 60’ Aluminum Walk Platforms For Unloading Trucks, Platform Is 8’ Above Floor Level.

• Viron Acid Bath Ventilation/Scrubber System, 20Hp Blower Motor, See Photo.

• Cantilever Racks, Banders, Well Pumps; Burkey Genesis Space Saver Gas Boiler.

• BAC Chilling Tower.

• Johnson 125 HP Well Pump

Auction Terms

EVERYTHING IS SELLING ON AN “AS IS, WHERE IS, IN PLACE” BASIS WITH NO WARRANTIES OR GUARANTEES OF ANY KIND. IT IS THE BUYER’S RESPONSIBILITY TO INSPECT BEFORE BIDDING. EVEN THOUGH INFORMATION HAS BEEN RECEIVED FROM SOURCES DEEMED RELIABLE, IT IS THE BUYER’S RESPONSIBILTIY TO INSPECT BEFORE BIDDING. PAYMENT IS TO BE MADE IN FULL ON DAY OF AUCTION WITH CASH, VISA, MC OR DISCOVER, WIRE TRANSFER, COMPANY CHECKS MUST BE ACCOMPANIED WITH A BANK LETTER OF GUARANTEE. SELLERS RESERVE THE RIGHT TO DELAY THE RELEASE OF ASSETS PURCHASED UNTIL CHECKS CLEAR. THERE IS A 10% BUYER’S PREMIUM TO BUYERS ON SITE, 15% FOR BIDSPOTTER BUYERS, AND AN ADDITIONAL 3% WILL BE CHARGED TO THOSE WHO USE CREDIT CARDS, WHETHER ON SITE OR ON BIDSPOTTER. SALES TAX MAY APPLY. IF YOU ARE EXEMPT, BRING YOUR EXEMPTION CERTIFICATE.

REMOVAL TERMS: PER I NSTRUCTIONS FROM OUR SELLERS THE FOLLOWING TERMS WILL APPLY TO REMOVAL. ANY RIGGING COMPANY HIRED BY BUYERS MUST DELIVER TO SELLER CERTIFICATES OF INSURANCE PRIOR TO MOVING ANYTHING. FOR OVERHEAD CRANES, BUYER’S MUST USE ONE OF TWO C ONTRACTORS S ELECTED BY SELLER WHO WILL BE ON SITE TO REMOVE OVERHEAD CRANES. SMALLER ITEMS THAT CAN BE REMOVED EASILY MUST BE REMOVED WITHIN 7 DAYS OF AUCTION. ALL OTHER ITEMS MUST BE REMOVED WITHIN 4 5 DAYS. SOME ELECTRICAL SUBSTATIONS AND A COUPLE OVERHEAD C RANES MUST REMAIN UNTIL S EPTEMBER 1ST IN ORDER TO MAINTAIN ELECTRIC IN THE BUILDING.

BIDSPOTTER: A 15% BUYER’S PREMIUM IS I NEFFECT FOR ONLINE BUYERS. All of the above terms that apply to onside buyers, also apply to “Online” Buyers. If you want us to bid on your behalf, please fax to our office the items you want to bid on, the amount you are willing to go, including the buyer’s premium, and a credit card # and we will bid on your behalf, just as if you are at the auction. Fax# 937-878-6161

Directions/Map

Heading East on I-80 get off at exit # 112. Go right at end of exit on Division St for 1/4 mile to stop light. Go left on Route 6 for 6 and 1/10th miles to Tabler Road, auction site is on right, at the corner of Tabler Rd and Route 6. Coming from Chicago and headed West on I-80, get off at Exit # 122, Minooka and go South on Ridge Road approx. 3 miles to Route 6. Go right on Route 6 & go 2 and 3/10th miles to auction site on left.

NOTE: Plenty of motels at Exit # 127 & exit #112.

Gallery: Gallery

Click on any image to view larger.

Formerly the SAPA Aluminum Extrusion Plant

Details

Auction Terms

Directions/Map

Gallery: Gallery