Siemens Energy and Automation, Inc.

AUTOMATIC SURFACE GRINDERS

• Okamoto Model ACC 16-24 DX-V 3-Axis Automatic Surface Grinder, s/n 66128, New 1998, Spark Out, Electric Chuck with Controls, Filtration Coolant, Dresser

• Okamoto Model ACC-12-24 DX 3-Axis Automatic Surface Grinder, s/n 63503, New 1992, Spark Out, Electric Chuck with Controls, Filtration Coolant, Dresser

CNC VERTICAL BED MILL

• Chevalier Model FM-2040MB CNC Vertical Bed Mill, s/n MB866004, Delta Dynapath Autocon 3-Axis CNC Control, 40 Taper, 5 HP, Power Drawer Bar

CNC VERTICAL MILL

• YCM Supermax Model YCM-40 3-Axis CNC Knee Mill, s/n 611839, New 1996, Delta Dynapath Autocon 3-Axis CNC Control, 40 Taper, Power Drawer Bar

VERTICAL MILLS

• Bridgeport Series I, 2 HP Vertical Mill, Accurite DRO, Power Table Feed, s/n 12BR253776

• Bridgeport Series I, 2 HP Vertical Mill

HAND FEED SURFACE GRINDERS

• Okamoto Model Linear 618 Hand Feed Surface Grinder, s/n 8348U, Walker Ceramax Chuck

• Chevalier Model FSG-618M Hand Feed Surface Grinder, s/n A3882025, New 1999, Walker Ceramax Chuck, Sony DRO, Over the Wheel Dresser, Filtration Coolant

• Chevalier Model FSG-618M Hand Feed Surface Grinder, s/n A3882027, New 1999, Walker Ceramax Chuck, Sony DRO, Over the Wheel Dresser, Filtration Coolant

• Do-All Model DH-612 Hand Feed Surface Grinder, s/n 138-682859, Walker Ceramax Chuck

RADIAL ARM DRILL

• Ikeda Model RMS-9 Radial Arm Drill, s/n 80086, 3’ X 9”, Box Table, Power Clamp and Elevation, Coolant

PRESS BRAKE

• Niagara Model IB-150-8-10 Power Press Brake, s/n 51357, 150 Ton, 10’ Overall, 8’ Between Housings, Hurco Auto Bend 6 CNC Back Gauge, Safety Curtains, Wintriss Load Analyzer

PUNCHES/FABRICATORS

• Strippit Model Super AG 30/30 Single Station Punch, s/n 2334033193, Strippit CNC Back Gage Control, 30 Ton, Punching Head, Misc. Tooling

• Strippit Model Custom 18/30 Single Station Punch, s/n 5662580, 30 Ton

TUBE BENDER

• Heller Model Apollo P-280 Hyd. Bender, Maximum Bend Pressure 230 Bar

GAP FRAME PRESS

• Minster #70-4 Gap Frame Press, s/n 70-4-17298, 60 Ton, 32” X 21” Bed, 3” Stroke, 13.5” Shut Ht., 90 SPM, Air Clutch & Brake, Air Counterbalance

OBI PUNCH PRESSES

• Bliss Model C110 OBI Punch Press, s/n H68246, 110 Ton, 4” Stroke, 18” Shut Height, 60 SPM, Rapid Air Pneu. Feeder, Wintriss Load Analyzer

• Minster #6 OBI Punch Press, s/n 6-15638, 60 Ton, 4” Stroke, 90 SPM, 32” X 21” Bed, Air Clutch and Brake, Rapid Air Pneumatic Feeder

• Minster #6 “Die-Namic” OBI Punch Press, s/n 6-16019, 60 Ton, 4” Stroke, 16” Shut Height, 32” X 21” Bed, Air Clutch and Brake, Air Counterbalance

• Minster #5 OBI Punch Press, s/n 5-16595, 45 Ton, 3” Stroke, 10.75” Shut Ht., 90 SPM, 28” X 18” Bed, Air Clutch and Brake, Wintriss Load Analyzer

• Minster #5 OBI Punch Press, s/n 5-14794, 45 Ton, 3” Stroke, 10.75” Shut Ht., 90 SPM, 28” X 18” Bed, Air Clutch and Brake, Wintriss Load Analyzer

• Minster #5 OBI Punch Press, s/n 5-17758, 45 Ton, 3” Stroke, 10.75” Shut Ht., 90 SPM, 28” X 18” Bed, Air Clutch and Brake, Wintriss Load Analyzer

• Minster #4 OBI Punch Press, s/n 4-18325, 32 Ton, 3” Stroke, 9.5” Shut Height, 100 SPM, 24” X 15” Bed, Air Clutch and Brake

• Minster #4 OBI Punch Press, s/n 4-17575, 32 Ton, 3” Stroke, 9.5” Shut Height, 100 SPM, 24” X 15” Bed, Air Clutch and Brake

• Minster #4 OBI Punch Press, s/n 4-14793, 32 Ton, 3” Stroke, 9.5” Shut Height, 100 SPM, 24” X 15” Bed, Air Clutch and Brake

• Minster #4 OBI Punch Press, s/n 4-12432, 32 Ton, 3” Stroke, 9.5” Shut Height, 100 SPM, 24” X 15” Bed, Air Clutch and Brake

• Bliss Model C-22 OBI Punch Press, s/n H66515, 22 Ton, 2 1/2” Stroke, 9” Shut Height, Air Clutch and Brake

STRAIGHT SIDE PRESS

• Minster Model 50-5 1/2-42 Straight Side Press, s/n 50-5.5-4251, 106 Ton, 12” Stroke, 21” Shut Height, 42” X 34” Bed, Triad Press Cam 7 Controls, Air Clutch and Brake, Air Counterbalance

HYDRAULIC C-FRAME PRESSES

• Dennison 12 Ton Multipress Hydraulic C-Frame Press, Model MP12TR, s/n 32982, Dual Palm Buttons

• Dennison 6 Ton Multipress Hydraulic C-Frame Press, s/n 18521, Dual Palm Buttons

• Hannifin 8 Ton Hydraulic C-Frame Press, Model 0GF8B-2-2-PB6, s/n T-5805-1, Dual Palm Buttons

VERTICAL BAND SAWS

• Dake Johnson Model VH-24 Vertical Band Saw, s/n 197832, Blade Welder, Power Table Feed

• Grob Model NS-18 Vertical Band Saw, s/n 3070, Blade Welder

• Delta Rockwell 14” Vertical Band Saw

HORIZONTAL BAND SAWS

• Johnson Model J, 10” X 16” Horizontal Band Saw, s/n J-3927

• Kalamazoo Model H9AWV Horizontal Band Saw, s/n 17537, Coolant, 9” X 16” Capacity

• Peerless Model HB-711A Automatic Horizontal Band Saw, s/n HB711A-128, 10” Round Capacity

ENGINE LATHES

• Sheldon 15” X 48” Toolroom Lathe, s/n 33035, 10” 3-Jaw Chuck

• South Bend 13” X 40” Lathe, s/n 169419

TOOLROOM HONE

• Sunnen Model MBB-1660 Hone, s/n 88514

H-FRAME HYDRAULIC SHOP PRESSES

• Dake 50 Ton H-Frame Hydraulic Shop Press

• Dake 50 Ton H-Frame Hydraulic Shop Press

WELDERS

• Miller Millermatic Challenger Mig Welder, s/n KH482943

• Miller Model 330A/BPLA Tig Welder, s/n JF943730, Miller Chiller

• Lincoln SAE-300 Arc Welder

SPOT WELDERS

• Taylor Winfield Model TF-A3-8-50A1P0PEPA Spot Welder, s/n 81308, 50 KVA

• Federal Model PA-1-12/18 Spot Welder, s/n 40141-100, 50 KVA, Intertron 108B Controls

• Wean United Model RA-3-8 Spot Welder, s/n 36438-104, 50 KVA, Robotron Controls

• Lors Model 445 Spot Welder, s/n 188-3864, 50 KVA, Robotron Controls

• Lors Model 445 Spot Welder, s/n 1282-3003, 50 KVA, Robotron Controls

• Lors Model 445 Spot Welder, s/n 284-3202, 50 KVA, Robotron Controls

DRILL PRESSES

• Allen 24” Single Spindle Drill Press, s/n 32459, Power Feed, Reversing

• Delta Rockwell 17” Single Spindle Drill Press, s/n 1452612, Var. Speed

• Clausing Model 20 4-Spindle Drill Press, 20”, (2) Spindles with Bellows Air Feeds, (1) with Tapping Head

• Clausing Model 2276, 15” Single Spindle Drill Press, s/n 527498, Reversing

• Clausing Model 1767 15” Single Spindle Drill Press, s/n 531510

• Powermatic Model 1150A Single Spindle Drill Press, 15”, s/n 8415V266

• Powermatic Model 1150A Single Spindle Drill Press, 15”, s/n 8415V212

• Jet Model JDP-20MF Single Spindle Drill Press, 20”, s/n 0030971

• (4) Delta Rockwell 15” Single Spindle Drill Presses

• Numerous additional Single Spindle Drill Presses

TAPPING MACHINES

• Speedy-Cut Model ST-1 Tapper, s/n 860241

• Speedy-Cut Model ST-1 Tapper, s/n 860254

PRESS FEED EQUIPMENT

• Feed Lease Model RF-6X18 Feeder/Straightener, s/n 5012, .281” X 18” Cap.

• Rowe Model B-10/3J Combination Cradle/Feeder/Straightener, s/n 25840, 48” Max OD, 10” Width, .140” Capacity

• American 6,000 Lb. Capacity Motorized Coil Reel, 54” Max. OD, 24” Max. Width, Air Clutch and Brake

• Littell Model 20-12 Motorized Coil Reel, s/n S-3509-77, 2,000 Lb. Cap., 12” Width, 20” OD

• Littell Model 20R Motorized Coil Reel, s/n S-838980, 2,000 Lb. Capacity, 12” Width, 20” OD

• (3) Littell Model #5 Pay-Off Reels, 500 Lb. Capacity

• P.A. Industries Model 600 Motorized Coil Reel, 600 Lb. Capacity, 36” OD, 14” Width

• Rapid Air Model R24-P Motorized Coil Reel, s/n 82949, est. 500 Lb. Capacity

HEAT TREAT FURNACES

• Lucifer Model RD8-KHE24, s/n 7312, Dual Chamber, Heat Treat and Anneal, 2,200 Degree Upper Chamber, 1,200 Degree Lower Chamber, 12” X 14” X 24” Chambers, Solid State Controls

• Blue M Oven, Model IGF-880F-4, s/n IGF-284, 1,100 Degree Max., 24” X 36” X 26”, Exhaust, Micro-Processor Control

• Rich Heat Treat Oven, Model HCE-333, s/n 936-1440, 500 Degree, 36” X 36” X 36”

AIR COMPRESSORS

• Ingersol Rand Model XLE, 200 HP Piston Type Air Compressor, s/n JH8163, New 1988, Size 17-10X7

• Ingersol Rand Model XLE, 200 HP Piston Type Air Compressor, s/n JH7347, New 1981, Size 17-10X7

REFRIGERATED AIR DRYER

• Ingersol Rand Model TM-1900-E4 “Thermal Mass” Refrigerated Air Dryer, s/n 98GTM337, New 1998, Intellisys PLC Control

CHILLER/COOLING TOWER SYSTEM

• Industrial Chilling Equipment Model TTS-150D-WSB-SP Dual Pump Cooling Tower Tank System, s/n C5397-3905-2, 150 Ton Chiller, 1,400 Gallon Tank, 450 GPM, Controls, Aquatower Cooling Tower, Sand Filter

• Koolant Koolers Model HWX-30-000BF Refrigeration Type Chiller, s/n 369, Natural Gas

DUAL PUMP VACUUM PUMP SYSTEM

• Siemens Dual Pump Vacuum Pump System, (2) 25 HP Pumps, Discharge Separators, Strainers, Receiver Tank, Controls, New 2000

VEHICLES

• 2006 Ford F-250 XL Super Duty Pick Up Truck, Cap, Vin 1FTNF20566EA77155

• 1999 Bering/Hyundai Box Truck, vin KMFHB47AXY0115108, 112,000 Miles, Detroit Diesel, 16’ Box, Auto.

• 1997 Plymouth Van Voyager Van

• 1995 Plymouth Voyager Van, Vin 1P4GH44R4SX52884

FORK LIFTS

• Yale Model GLC030GBJUAV083 Fork Lift, s/n N409168, 3,000 Lb. Cap., LP, Hard Tire, Cage

• Hyster Model S30XL Fork Lift, s/n B010B2882F, 3,250 Lb. Capacity, LP, Hard Tire, Cage

• Hyster Model H50XL Fork Lift, s/n A177837311L, 5,000 Lb. Capacity, LP, Pneumatic Tire, Enclosed Cab, 3-Stage Mast

TOOL CABINETS

• Equipto 10 Drawer Tool Cabinets, (13) Available

• Lyon 9 Drawer Tool Cabinet

• Equipto and Lista 13 Drawer Tool Cabinets

• Lista Butcher Block Top Tool Cabinets/Machinists Benches, (9) Avail.

• Equipto Butcher Block Top Tool Cabinets/Machinists Benches (9) Avail.

• Lyons and Stronghold Heavy Duty Upright Storage Cabinets, (12) Avail.

OVERHEAD CRANES AND HOISTS

• Free Standing 2-Ton Capacity Free Standing Crane, Equipped with (1) Demag 2 Ton Hoist and (1) Demag 1 Ton Hoist, Approx. 30’ Length, 8’ Width, 9’ Under the Hook

• Bohle 2 Ton Bridge Crane with CM Lodestar 2 Ton Electric Hoist, Approx. 40’ Span

• Numerous Additional Crane Rails and Crane Systems

• (3) Demag 1 Ton Electric Hoists

• Coffing 1 Ton Electric Hoist, 10’ Lift (New in Box)

• (2) Demag 2 Ton Electric Hoists

• Numerous Additional Electric and Chain Fall Hoists, Various Capacities

TOOL STORAGE SYSTEM

• Kardex Kampakt Tool Storage System, Movable Shelves, 3 Shelves with Tracking, Approx. Shelve Length 15’ Each

LIFTING TRUCKS AND WALK BEHIND LIFTS

• Crown 2,500 Lb. Capacity Electric Die Lift Cart, Model 20M, s/n 1A295612

• Crown 2,000 Lb. Capacity Electric Die Lift Cart, Model 20B, s/n 1A202799

• Crown 2,000 Lb. Capacity Electric Die Lift Cart, Model 20B, s/n 1A205298

MISCELLANEOUS MACHINERY

• Air Flow Cartridge Type Dust Collector, s/n W3607

• Wilson Rockwell 4JR Hardness Tester

• (2) Nobles Centrifugal Dryers/Chip Wringers, 18” High Cyl., 12” Dia.

• (5) New Holland Model K-24 Dryers/Chip Wringers

• Kalamazoo 8” Belt Sander

• (4) Kalamazoo 1” Belt Sanders

• (9) Torit Model 64 Dust Collectors

• Ridgid Model 1822-1 Pipe Threader, s/n EA11616C95, Tooling

• Darex M4 Drill Grinder

• Kearney & Trecker Model CSM-20 Plain Horizontal Mill, 50 Taper

• Troy Bilt Pressure Washer, 2,450 PSI, 6.75 HP

• (2) Air Flow Systems Smoke and Fume Collectors

• Dana Super 1 Crimper

• Factory Cat Model 29 Floor Scrubber

• Clarke Model 2400D Floor Scrubber

• Tennant Model 186E Floor Sweeper

• HPM Model 150 Plastic Inject. Molding Machine, s/n TC150-6003, 150 Ton

• Advantage Sentra LE Temperature Controller

• Simplicity Model Snow Away 7 Snow Blower

• Altek Rotary Shrink Wrap Machine, Approx. 60” Diameter Table

• Scotsman Model CME506WE-1A Ice Maker

PLASTIC TOTES

• Approx. 10,000 Plastic Totes, Various Sizes

TOOLING AND MACHINE ACCESSORIES

40 Taper Holders, Collets, Kurt Vises, Harig Grind-Alls, Lectric Centers, Radius Dressers, Clamps, End Mills, Drills, Taps, Dies, Reamers, Saw Blades, Abrasives, Grinding Wheels, Inspection Items, Punches, Dies, Arbor Presses, Pedestal Grinders, Sanders, Hone Toolking, Magna-Sines, Angle Plates, Minuteman Broach Sets, etc.

MISCELLANEOUS SHOP ITEMS

Complete Contents of Huge Maintenance Crib, including Milwaukee 1 1/2” Rotary Hammer, Milwaukee Band Saw, Level, Tap and Die Sets, Socket Sets, Helicoils, Pipe Wrenches, RIdgid Pipe Threaders, Bearing Pullers, Greenlee Knockout Punch Driver Set, Greenlee Cable Cutters, Greenlee Power Finder/Circuit Seeker, Gages, Meters, Hand Tools, Power Tools, Air Tools, Fastening, Miscellaneous Hardware, Building and Machine Maintenance Items, Pallet Racking, Gravity Flow Racking, Horses, Chain, Cable, Straps, Binders, Press Clamp Components, Ladders, Fans, Self Dumping Hoppers, Motors, Blowers, Filters, Heaters, Pipe Benders, Clamps, Conveyor, NSF Racking, Siemens Brand Parts and Components, Infrared Heaters, Lyon and Kennedy Tool Boxes, Challenger Model 3260 Crane Scale, Gloves, Springs, Toledo Floor Scales, Shop Furnishings, 100’s of Shop Stools, Southworth Hydraulic Scissor Lift Tables, Hoists, Fork Extensions, Heavy Duty Steel Cantilever Steel Racks w/48” Arms, Economy Telescoping Hi-Jacker, Hand Trucks, Counting Scales, Floor Mats, Shop Vacs, Custom Made Machinery, Many Other Items

• Large Quantity Clean Office Furniture, including Desks, Chairs, Files, Conference Table, Credenzas, Book Shelves, etc.