Toolcraft of North Carolina

Details

Click on any image to view larger.

CNC 5-AXIS UNIVERSAL MACHINING CENTER

• YCI Supermax Model TCM-180HVA 5-Axis CNC Machining Center, s/n 312043, New 1996, Combination Universal Head (Programmable Vert. and Horiz.), Fanuc 15M CNC Control, 20” CNC Programmable Rotary Table, 50 Taper, 30 ATC, 78.7” X 23.6” Table, 70.8” X Axis Travel, 29.1” Y Axis Travel, 35.4” Z Axis Travel

CNC VERTICAL MACHINING CENTERS

• Cincinnati Milacron Lancer 2000 CNC Vertical Machining Center, s/n 7052F00-98-0006, New 1998, Fanuc 18i-M CNC Control, 50 Taper, 30 ATC, 25 HP, 6,000 RPM, 90” X 30” Table, 80” X 30” X 30” Travels, Dual Chip Conveyor, Steel Way Covers, Ridgid Tapping

• YCI Supermax Model Rebel Max-3 CNC Vertical Machining Center, s/n 212672, New 1993, Fanuc 0-M CNC Control, 40 Taper, 16 ATC, 15/10 HP, 37.25” X 16” Table, 40” X 18.25” X 25” Travels

• YCI Supermax Model Rebel Max-1 CNC Vertical Machining Center, s/n 511252, New 1996, Fanuc 0-M CNC Control, 40 Taper, 16 ATC, 15/10 HP, 33” X 16.5” Table,25.5” X 16.1” X 18.1” Travels

• YCI Supermax Model Rebel Max-1 CNC Vertical Machining Center, s/n 411057, New 1994, Fanuc 0-M CNC Control, 40 Taper, 16 ATC, 15/10 HP, 33” X 16.5” Table,25.5” X 16.1” X 18.1” Travels

• Takumi Seiki Model V11A CNC Vertical Machining Center, s/n G0541, New 1997, Fanuc 0-M CNC Control, 54” X 20.4” Table, 44” X 22” X 22” Travels, 40 Taper, 24 ATC, 25 HP, 8,000 RPM

• Cincinnati Milacron Model 5VC-750 CNC Vertical Machining Center, s/n 95095VC84-0174, New 1984, Acramatic 900 CNC Control, 40 Taper, 30” X 15” X 20” Travels, 24 ATC

CNC FLAT BED TOOLROOM LATHE

• Milltronics Model ML28 CNC Toolroom Lathe, s/n 5868, New 1999, 28” X 120” Capacity, 4” Spindle Bore, Centurian 6 CNC Control, Manual Tool Post, Steady Rest, 15” 3-Jaw Chuck, 18.6” Swing over Cross Slide, 20/15 HP, 2,000 RPM, Tail Stock, Steady Rest

CNC UNIVERSAL TURNING CENTERS

• Cincinnati Milacron Model Falcon 200 CNC Turning Center, 2-Axis, s/n 7048A0A-980322, New 1998, Acramatic/Vickers Model 2100 CNC Control, 2” Capacity, 14.1” Max. Turning Diameter, 15.754” Max. Centers, 4,500 RPM, 10” 3-Jaw Chuck, Chip Conveyor, Tailstock, Equipped with Spego Hyd. Bar Feed

• Gildemeister Model CT-200 CNC Turning Center, s/n 3210088, New 1997, Fanuc 0-T CNC Control, 2-Axis, 2” Capacity, 7.87” Max. Turning Diameter, 11.8” Max. Turning Length, Chip Chip Conveyor

• Gildemeister Model CT-200 CNC Turning Center, s/n 3210087, New 1997, Fanuc 0-T CNC Control, 2-Axis, 2” Capacity, 7.87” Max. Turning Diameter, 11.8” Max. Turning Length, Chip Chip Conveyor

• YCI Supermax Model YCM-TC-2 CNC Turning Center, s/n 412073, New 1994, Fanuc 0-T CNC Control, 2-Axis, 2” Cap., 18.9” Max. Swing, 9.8” Max. Turning Diameter, 18.4” Max. Turning Length, 15 HP, Chip Conveyor, Tailstock, 8” 3-Jaw Chuck

• YCI Supermax Model YCM-TC-2 CNC Turning Center, s/n 301198, New 1993, Fanuc 0-T CNC Control, 2-Axis, 2” Cap., 18.9” Max. Swing, 9.8” Max. Turning Diameter, 18.4” Max. Turning Length, 15 HP, Chip Conveyor, Tailstock, 8” 3-Jaw Chuck

• Methods Slant 50C CNC Turning Center, s/n 97247, New 1999, Yasnac J50L CNC Control, 10” 3-Jaw Chuck, 2.5” Capacity, 12.4” Est. Max. Turning Diameter, 26” Est. Max. Length, Chip Conveyor

• Methods Slant 50C CNC Turning Center, s/n 97245, New 1999, Yasnac J50L CNC Control, 10” 3-Jaw Chuck, 2.5” Capacity, 12.4” Est. Max. Turning Diameter, 26” Est. Max. Length, Chip Conveyor

• Methods Slant 50C CNC Turning Center, s/n 97252, New 1999, Yasnac J50L CNC Control, 10” 3-Jaw Chuck, 2.5” Capacity, 12.4” Est. Max. Turning Diameter, 26” Est. Max. Length, Chip Conveyor

• Methods Slant 50C CNC Turning Center, s/n 97244, New 1999, Yasnac J50L CNC Control, 10” 3-Jaw Chuck, 2.5” Capacity, 12.4” Est. Max. Turning Diameter, 26” Est. Max. Length, Chip Conveyor

• Methods Slant 50C CNC Turning Center, s/n 97242, New 1999, Yasnac J50L CNC Control, Master Collet Nose, 2.5” Capacity, 12.4” Est. Max. Turning Diameter, 26” Est. Max. Length, Chip Conveyor

• Methods Slant 50C CNC Turning Center, s/n 97235, New 1999, Yasnac J50L CNC Control, Master Collet Nose, 2.5” Capacity, 12.4” Est. Max. Turning Diameter, 26” Est. Max. Length, Chip Conveyor

CNC BED MILL

• SWI/Prototrak Model TRM 2-Axis CNC Bed Mill, s/n 94-254, Prototrak MX-2 CNC Control, 2-Axis, 40 Taper, Power Drawer Bar

CNC ROTARY INDEXER

• Haas HRT210 CNC Indexer, with Haas Brushless Controller, Tailstock, 8” Face Plate

CNC TOOLSETTER

• PWB Tool Master 10-2D CNC Tool Setter, TC100 Controls, 12.2” Max. Diameter, 14.1” Max. Length

HORIZONTAL JIG MILLS

• Devlieg Spiramatic Model 43H-72 Jig Mill, s/n 8903, 4” Spindle, 50 Taper, Power Drawer Bar, 48” X 72” Table, 72” Table Travel, 48” Vertical Travel, 20” Spindle Travel, 16” Platen Travel, Steel Way Covers, Anilam DRO

• Devlieg Spiramatic Model 3H-48 Jig Mill, 3” Spindle, 40 Taper, 35” X 48” Table, 48” Table Travel, 36” Vertical Travel, 16” Spindle Travel, 16” Platen Travel, Anilam DRO

CENTERLESS GRINDERS

• Cincinnati Model 340-20 Twin Grip Centerless Grinder, s/n 350520H76-0041, New 1976, Rebuilt 2000, Nominal Cap. 0-3”, Max. Capacity 6”, 20” Wheel Width, 40 HP, Feed System

• Cincinnati #3EA Centerless Grinder, s/n 3M3H1K-124, Nominal Cap. 0-3”, Max. Capacity 6”, 30 HP, Hydraulic Dressers

DOUBLE DISC GRINDER

• Gardner Model 125 Double Disc Grinder, 15 HP, 26” Wheels, 34” Rotary Feed Carrousel, Dresser, Rebuilt

CYLINDRICAL GRINDERS

• Cincinnati 14” X 72” Universal ID/OD Grinder, s/n 3U14F1L-8, Swing Down ID Attachment, Steady Rest

• Jack Mill Model JMC-650AGC Universal ID/OD Grinder, s/n JM-20329, New 1995, 12” X 28” Cap., Swing Down ID Attach., 3 and 4 Jaw Chuck, 8” Diameter Mag. Chuck, Collet Attachment

INTERNAL GRINDER

• Heald Model 271 Internal Grinder, s/n 32531, Rebuilt, Heald Red Head, Dresser, Coolant

JIG GRINDER

• Moore #3 Jig Grinder, s/n G678, Moore Grinding Head, Sony Digital Read Out

SURFACE GRINDERS

• Sharp Model SG618 Hand Feed Surface Grinder, 6” X 18”, PM Chuck

• Gallmeyer & Livingston Grand Rapids Model 280 Automatic Surface Grinder, s/n 280134, 8” X 24”, Chuck, Coolant

• Gallmeyer & Livingston Grand Rapids Model 55 Automatic Surface Grinder, s/n S-55696, 12” X 36”, Electric Chuck, Coolant

• Gallmeyer & Livingston Grand Rapids Model 20 Hand Feed Surface Grinder, s/n S-20169, 6” X 18”, Mag. Chuck, Coolant

• Gallmeyer & Livingston Grand Rapids Model 20 Hand Feed Surface Grinder, s/n S-20175, 6” X 18”, Mag. Chuck, Coolant

LATHES

• Clausing Colchester 17” X 80” Engine Lathe, s/n 7/0220/14880, Inch/Metric, Steady Rest

• Cincinnati Hydrashift Engine Lathe, s/n 1W5D5S-9, 22” X 60”, 2” Capacity, Steadry Rest, 3 and 4-Jaw Chucks

• Sharp Model 1660C Tool Room Lathe, s/n 8803101, New 1999, 16” X 60”, Inch/Metric. Steady Rest

• Hardinge Model DV-59 Second Operation Lathe, 5C Spindle, Misc. Tooling

AUTOMATIC COLD SAW

• Kalamazoo Model C-370A Fully Automatic Cold Saw, New 1997, 14.5” Blade, 7” Max. Vise Opening, Mitre Cut, Vertical Design, 0-20” Feed, PLC Control, Conveyor, 4 HP

HORIZONTAL BAND SAWS

• Hem Model Sidewinder SWA-1 Fully Automatic Horiz. Band Saw, s/n 929906, 12.75” X 16” Cap., PLC Control, 3 HP, 1” Blade

• W.F. Wells Model W-9 Horizontal Band Saw, s/n W62445

• Do-All Model C4 Horizontal Band Saw, s/n 234-712144, 9 3/4” Capacity

• Continental/Standard Model BS-120A Fully Automatic Horizontal Band Saw, 12” Capacity

• Jet 7” X 10” Horizontal Band Saw, 110/1/60 AC Electrics

• Carolina Model LCD712 Horizontal Band Saw, 7” X 12”

VERTICAL BAND SAW

• Do-All Model 1612-U Vertical Band Saw, s/n 146-63995, Welder, 16” Capacity

VERTICAL MILLS

• Bridgeport Series II Special Vertical Mill, s/n 2921S, 11” X 58” Table, 2 HP, Digital Read Out, Power Table Feed

• Sharp Vertical Mill, Model LMV, s/n 70825094, 3 HP Variable Speed, 10” X 50” Table, Digital Read Out, Servo Power Table Feed

• Sharp Vertical Mill, Model LMV, s/n 70424760, 3 HP Variable Speed, 10” X 50” Table, Digital Read Out, Servo Power Table Feed

• Bridgeport Vertical Mill with Sharp 3 HP Variable Speed Mill Head, s/n 71001183, Digital Read Out

OPTICAL COMPARATOR

• Jones and Lamson Model Epic 230 Optical Comparator, s/n E-7222, 30”, Surface Illumination, Quadracheck 2000

Processor/DRO

COORDINATE MEASURING MACHINE

• Brown and Sharpe Micro Xcel PFX Coordinate Measuring Machine, s/n 0797 3442, New 1997, Model 7-10-5, Renishaw Probe, Micromeasure 4 Operating Software, 39” X 27” X 19” Cap., Granite Base, Bridge Style

LASER SCAN MICROMETER

• Mitutoyo Model LSM-512 Laser Scan Micrometer, .04-4.72” Measuring Range, Controls

ELECTRONIC HEIGHT GAGE

• Brown and Sharpe Tesa 12” Electronic Height Gage, 12” Maximum Height Capacity

TOOLROOM HONE

• Sunnen Model MBB1660 Toolroom Hone, s/n 82459

JIG BORER

• Moore Model #3 Jig Borer, s/n B378

WELDERS

• Miller Model Legend Welder/Generator, s/n KK023231, Gas, 5,000 Watt Generator

• Miller Millermatic 250 Mig Welder, s/n KK070114, Built In Wire Feeder

• Miller Deltaweld 300 Tig Welder, s/n KE637072

• Miller Synchrowave 250DX Tig Welder, s/n LE364872, New 2005

• Thermal Arc Model PAK 50XL Plasma Cutter

• Airco Model 2 ADB-2 Tig Welder, s/n 10943

• Miller Mig Welder, Miller Wire Feed

• Lincoln Idealarc Tig Welder, Model R3S, s/n AC492168

MISCELLANEOUS MACHINERY

• Empire Sand Blast Cabinet, with Reclaimer

• Mitutoyo Model RA-116 Electronic Roundness Tester

• Arcon 40 Ton H-Frame Hyd. Shop Press, Model CP400

• Electro-Arc Tap Buster

• Mitutoyo Model AR20 HT Hardness Tester

• Clark Hardness Tester

• Detroit Model PHL 2 Heavy Duty Hardness Tester, s/n 416

• Mohawk Model 302 Drill Grinder, s/n DS117

• Hammond Double End Carbide Tool Grinder

• Torit Dust Collector

• Berns Deburring Machine

ANGLE PLATES

• Devlieg 16.5” X 30” X 16” Angle Plates (Pair)

• 12.5” X 30” X 20” Angle Plates (Pair)

TOOLING AND MACHINE ACCESSORIES

• Mills, Drills, Reamers, Taps, Dies, Large Quantity Carbide Inserts, 100’s of 40 Taper and 50 Taper CNC Holders, CNC Collets, Height Gages, Thread Gages, Plug Gages, Cadillac Height Gage with Riser, Calipers, Micrometers, Bore Gages, Dressers, Spin Fixtures, Rotary Tables, Numerous Kurt Vises, Drill Vises, Aloris Lathe Tooling, Centers, Jacobs Chucks, Demag Plate, Wheel Balancers, Lathe Chucks, Moore Jig Grinding Spindle, Moore Extensions, Moore Tooling, Moore Jig Borer Holders, Boring Heads, 25” Troyke Rotary Table, 30” X 30” G & L Rotary Table, 20” X 20” Rotary Table, Boring Bars, Sine Plates, V-Blocks, Parallels, Numerous Surface Plates, Saw Blades, Grinding Wheels, Abrasives, Helicoils, Collets, NMTB 40 and 50 Taper Holders, Devlieg Microbores, Clamps, Hone Tooling, Pin Gages, Jo Blocks, Lathe Chucks, Pedstal Grinders, Small Sanders, Drill Presses, etc.

MISCELLANEOUS SHOP ITEMS

• Shop Furnishings, Ladders, Fans, Hoppers, C-Clamps, Building and Machine Maintenance Items, (2) 14-Drawer Steel Glide Steel Tool Cabinets, Lista Tool Cabinets, Cleaning Supplies, Hyd. and Electrical Items, Welding Supplies, (3) Floor Mounted Jib Cranes, Pallet Jacks, Carts, Pallet Racking, Shelving, Hardware, Fastening Items, Scrap Steel, Conveyor, Oxy-Acet Torch, Chain, Straps, Binders, Welding Tables, Heavy Steel Tables, Tool Boxes, Spare Parts, Many Other Items

Thompson Auctioneers, Inc.
Eric Vaughn, Auctioneer
North Carolina License 8880

Auction Terms

Everything is selling on an “As is, Where is, In place basis with NO warranties or guarantees of any kind; It is the buyer’s responsibility to inspect before bidding; Everything is to be paid for in full day of auction with Cash, Check with Bank Letter of Guarantee, Visa, MC or Discover. A 12% buyer’s premium is in effect for buyers on the premises who pay with cash or check and a 14% buyer’s premium for those who use credit cards and a 15% buyers premium in effect for those who will be bidding over the internet on www.bidspotter.com. Removal is the buyer’s responsibility, expense and risk.

IF YOU CANNOT ATTEND: Bid Live, Online at bidspotter.com or Fax the items you want to bid on with your max price and we will bid on your behalf. Please include a credit card number for downpayment in the event you are the successful bidder. Fax #: (937)878-6161.

BIDSPOTTER TERMS: ALL BIDSPOTTER PARTICIPANTS MUST PRE-REGISTER 24 HOURS PRIOR TO THE START OF THE AUCTION. A 15% buyer’s premium is in effect if you bid through bidspotter.com. All other terms of on-site buyers apply to bidspotter bidders

Directions/Map

%MAP%

Marion, North Carolina is approximately 40 miles East of Ashville, North Carolina, on I-40. From I-40, Take Exit 85, U.S. Route 221. Go North off Ramp onto U.S. Route 221, Traveling 2 and 4/10 Miles to Auction Site, Right Hand Side, 1877 Rutherford Road. Note after 2 Miles, U.S. Route 221 Turns to Left, Continue Straight on Business Route 221/Rutherford Road 4/10 Mile to Auction Site.

Gallery: Additional Pictures

Click on any image to view larger.

Well Equipped CNC Machine Shop

Details

Auction Terms

Directions/Map

Gallery: Additional Pictures