Troy Machine Enterprise, LLC

Details

Click on any image to view larger.

CNC VERTICAL MACHINING CENTERS

• Fadal VMC 4020A-HT CNC Vertical Machining Center, s/n 9910364, New 1999, CNC 88HS CNC Control, 40” X 20” X 20” Travels, 10,000 RPM, Hi-Torque, 21 ATC, 40 Taper

• Okuma Howa Model 4VA CNC Vertical Machining Center, s/n 02210, New 1983, Fanuc 6MB CNC Control, 32.2” X 14.1” X 19” Travels, 11/7.5 HP, 24 ATC, 40 Taper, Geared Head

• Okada Model VM500 CNC Vertical Machining Center, s/n 54155, New 1984, Fanuc 6MB CNC Control, 27.6” X 16.9” X 24.8” Travels, 6,000 RPM, 20 ATC, 40 Taper

CNC TURNING CENTER

• Okuma Model LB-15 CNC Turning Center, 5807-0622, OSP-5000L CNC Control, 8” 3-Jaw Chuck, Tail Stock, 15.75” Max. Swing, 19.69” Max. Centers, 15 HP, 2” Cap.

JIG MILLS

• Devlieg Spiramatic Model 2B-36 Horiz. Jig Mill, s/n 16668, 2.5” Spindle, 40 Taper, Power Draw Bar, Accurite 3-Axis DRO, 36” X 24” Table, 36” Long. Travel, 12” Cross Travel, 24” Vertical Travel, 12” Spindle Travel, Note: Factory Rebuild by Devlieg

• Devlieg/Herbert Spiramatic Model 2B-36 Horiz. Jig Mill, s/n Unknown, 2.5” Spindle, 40 Taper, Power Drawer Bar, Newall 3-Axis DRO, 36” X 24” Table, 36” Long. Travel,

12” Cross Travel, 24” Vertical Travel, 12” Spindle Travel

• Devlieg Spiramatic Model 2B-36 Horiz. Jig Mill, s/n 8131, 2.5” Spindle, 40 Taper, Power Drawer Bar, Accurite DRO, 36” X 24” Table, 36” Long. Travel, 12” Cross Travel, 24” Vertical Travel, 12” Spindle Travel

• Devlieg/Herbert Spiramatic Model 2B-36 Horiz. Jig Mill, s/n Unknown, 2.5” Spindle, 40 Taper, Power Drawer Bar, Newall 3-Axis DRO, 36” X 24” Table, 36” Long. Travel,

12” Cross Travel, 24” Vertical Travel, 12” Spindle Travel

• Devlieg Spiramatic Model 2B-36 Horiz. Jig Mill, s/n 12-244, 2.5” Spindle, 40 Taper, Power Drawer Bar, Accurite DRO, 36” X 24” Table, 36” Long. Travel, 12” Cross Travel, 24” Vertical Travel, 12” Spindle Travel

• Devlieg Spiramatic Model 2B-36 Horizontal Jig Mill, s/n 3-244, 2.5” Spindle, 40 Taper, Power Drawer Bar, Accurite DRO, 36” X 24” Table, 36” Long. Travel,

12” Cross Travel, 24” Vertical Travel, 12” Spindle Travel

• Devlieg/Herbert Spiramatic Model 2B-36 Horizontal Jig Mill, s/n Unknown, 2.5” Spindle, 40 Taper, Power Drawer Bar, Sargon DRO, 36” X 24” Table,

36” Long. Travel, 12” Cross Travel, 24” Vertical Travel, 12” Spindle Travel

• Devlieg Spiramatic Model 2B-36 Horizontal Jig Mill, s/n Unknown, 2.5” Spindle, 40 Taper, Power Drawer Bar, Accurite DRO, 36” X 24” Table, 36” Long. Travel,

12” Cross Travel, 24” Vertical Travel, 12” Spindle Travel

• Devlieg/Herbert Spiramatic Model 2B-36 Horizontal Jig Mill, s/n Unknown, 2.5” Spindle, 40 Taper, Power Drawer Bar, Newall 3-Axis DRO, 36” X 24” Table,

36” Long. Travel, 12” Cross Travel, 24” Vertical Travel, 12” Spindle Travel

• Devlieg/Herbert Spiramatic Model 3H-48 Horiz. Jig Mill, s/n 8-11158, 3” Spindle, 40 Taper, Power Drawer Bar, Sony 3-Axis DRO, 48” X 35” Table, 48” Long. Travel, 16” Platen Travel, 36” Vertical Travel, 16” Spindle Travel, Steel Way Covers

• Devlieg Spiramatic Model 3H-48 Horiz. Jig Mill, s/n 8-11082, 2-Axis Programmable Control, 3” Spindle, 40 Taper, Power Drawer Bar, Accurite DRO, 48” X 35” Table, 48” Long. Travel, 16” Platen Travel, 36” Vertical Travel, 16” Spindle Travel, Steel Way Covers

• Devlieg/Herbert Spiramatic Model 3H-72 Horiz. Jig Mill, s/n 5-10722, 3” Spindle, 40 Taper, Accurite DRO, 35” X 72” Table, 72” Long. Travel, 16” Platen Travel,

60” Vertical Travel, 16” Spindle Travel, Steel Way Covers, Power Drawer Bar

• Devlieg Spiramatic Model 43H-48 Horizontal Jig Mill, s/n 4-11606, 4” Spindle, 50 Taper, Sony DRO, 35” X 48” Table, 48” Long. Travel, 16” Platen Travel,

48” Vertical Travel, 20” Spindle Travel, Power Drawer Bar, Steel Way Covers

• Devlieg Spiramatic Model 43H-48 Horizontal Jig Mill, s/n 8760, 2-Axis Programmable Control, 4” Spindle, 50 Taper, Accurite DRO, Power Drawer Bar,

35” X 48” Table, 48” Long. Travel, 16” Platen Travel, 48” Vertical Travel,

20” Spindle Travel, Power Drawer Bar, Solid Cast Way Covers

• Yasda Model YBM-80J Horizontal Jig Mill, 50 Taper, Power Drawer Bar, 23” X 32” Table, 32” X 20” X 24” Travels

DEVLIEG ROTARY TABLES

• Devlieg 20” X 20” Rotary Table

• Devlieg 26” X 26” Rotary Table

• Devlieg 20” X 20” Air Lift Rotary Table

• Devlieg 18” X 18” Air Lift Rotary Table

• Devlieg 50” X 30” E-Style Table

• Devlieg 40” X 30” E-Style Table

ANGLE PLATES

• Devlieg 16” X 30” Angle Plates (Pair)

• Devlieg 14” X 36” Angle Plates (Pair)

• Numerous Miscellaneous Angle Plates, Various Sizes and Manufacturers

VERTICAL MILLS

• Bridgeport Series I, 2 HP Vertical Mill, s/n 12BR139976, Anilam DRO

• Bridgeport 1 1/2 HP Variable Speed Vertical Mill, s/n 12BR69738, Accurite DRO, Servo Feed X & Y

• KBC 3 HP Variable Speed Vertical Mill, Mitutoyo DRO, Servo Power Feeds on 3 Axis

LATHES

• Delta Rockwell 15” x 36” Tool Room Lathe, s/n 1493713, Newall DRO, Fully Tooled, 8” Chuck

• Cincinnati 12 1/2” X 36” Hydroshift Lathe, s/n 47841D, Taper Attachment 10” 3-Jaw Chuck

SURFACE GRINDERS

• Chevalier Model FSG-618M Hand Feed Surface Grinder, s/n 02B-4701, Walker Chuck

• Hammond 6” X 18” Hand Feed Surface Grinder, 6” X 18” Electric Chuck

BAND SAWS

• Grob Model NS-18 Vertical Band Saw, Blade Welder

• Do-All Model U16 Vertical Band Saw, s/n 157-61105

• Roll-In Universal Band Saw

• Kalamazoo Horizontal Band Saw, Model 9AW, s/n 3421

MISCELLANEOUS MACHINERY

• Haas CNC Indexer with Independent Controller, 8” Face Plate

• Hobart Mega Mig Model 300RVS Mig Welder, s/n 85WS01435, with Hobart Wire Feeder

• Century 230 Amp Arc Welder

• Miller Dialarc 230 Welder

• Burr King Model 760 Belt Sander

• Flex Arm Pneumatic Tapper

• Darex Model M5 Drill Grinder

• MTD Snow Blower

• Sheffield-Cordax Coordinate Measuring Machine, Model 1808, S/n 2-4415-1283, Renishaw Probe, Sheffield Microprocessor/DRO, Software, Granite Base, 30” X 25” X 20” Travels

• Devlieg Tool Pre-Setter, s/n 6318, 50 Taper, Accurite DRO

• Kalamazoo 1” Belt Sander

• Mitts and Merrill FootBurt Knuckle Type Radial Drill Press, s/n FD-775

• Fosdick 20” Single Spindle Drill Press

• Case 2-Stage, 10 HP Air Compressor

• Carolina H-Frame Hydraulic Shop Press, Model CD100, 30 Ton

FORK LIFTS

• Baker Electric Fork Lift, est. 3,000 Lb. Capacity, Cage, Hard Tire, Side Shift, Charger

• Towmotor LP Fork Lift, est. 6,000 Lb. Capacity, Cage, Hard Tire

VEHICLES

• 1994 Ford F-350XL Straight Truck, Vin 2FDKF37HXRCA03672, 114,000 Miles, Omaha 12’ Steel Bed, Side Kit

• 1996 Chrysler Sebring 2-Door Sedan, Vin 4C3AU5N6WE144388, 17,900 Miles

• 1995 GMC 1500 SLE Pick Up Truck, 4 X 4

• 1993 Plymouth Sundance, Vin 1P3XP24D4PN594320, 115,000 Miles, Hydrogen Assisted Engine, Inboard Hydrogen Fuel Cell for Enhanced Mileage

• 1993 Chevrolet Astro Van, Vin 1GNDM15Z6PB140644, 126,000 Miles

• 1999 Plymouth Voyager Van, Parts Unit

TOOLING, INSPECTION ITEMS AND MACHINE ACCESSORIES

Mills • Drills • Reamers • Taps • Dies • Inserts • Collets • Kurt Vises • Rotary Tables • Dividing Heads • Sine Plates • Super Spacers • Jacobs Chucks • Centers • Aloris Lathe Tooling • Lathe Chucks • Faceplates • Boring Heads • Devlieg Flash Change Tooling • 40 Taper CNC Holders (200+) • CNC Collets • 40 and 50 Taper NMTB Holders (1,000+) • Angle Plates • Fixtures • Parallels • Clamps • Grinding Wheels • Abrasives • Saw Blades • Punches • Broaches • Anway Grind-All • Carbide End Mills • Pedestal Grinders • Carbide Grinders • Small Sanders • Arbor Presses • Micrometers • Calipers • Pin Gages • Jo Blocks • Bore Gages • Tapping Heads • V-Blocks • Bridgeport Right Angle Head • Many Other Items Too Numerous To Mention

MISCELLANEOUS SHOP ITEMS

Shop Furnishings • Vidmar Tool Cabinets • Craftsman Tool Boxes • Kennedy Tool Boxes • Huot Drill Cabinets • Fans • Ladders • Straps • Binders • Chain • Hose • Self-Dumping Hoppers • Machine and Building Maintenance Items • Spare Parts • Horses • (2) 2-Ton Jib Cranes with Electric Hoists • Other Misc. Hoists Banders • Shipping Items • C-Clamps • Acytlene Torches • All Steel Stock Including Steel Racks • Hand Tools • Power Tools • Air Tools • Shop Vacs • Toolmaker’s Benches • Etc.

Auction Terms

Everything is being sold on an “As is, where is, in place basis” with no warranties or guarantees of any kind. It is the buyer’s responsibility to inspect before bidding. Everything must be paid for in full on day of auction with cash, check with proper ID, Visa, MC or Discover. A 12% Buyer’s Premium is in effect for onsite buyer’s. A 14% Buyer’s Premium with credit card purchases. Removal of purchases is the buyer’s responsibility, expense and risk.

BID-SPOTTER TERMS: If you are bidding on the internet thru www.bidspotter.com, the terms are as follows: A 15% Buyer’s Premium is in effect. Internet bidders must register with a credit card. If you are the successful bidder your credit card will be charged as follows: For amounts less than $5,000, the entire balance is due immediately with your credit card. For amounts greater than $5,000, a 25% deposit will be due immediately and the remaining balance is due within 48 hours either by cash, check, Visa, MC or Discover, or wire transfer.

IF YOU CANNOT ATTEND: Bid Live, Online at www.bidspotter.com or Fax to our office the items you want to bid on with your max price and we will bid on your behalf. Please include a credit card number for downpayment in the event you are the successful bidder. Fax #: (937)376-8328.

Directions/Map

%MAP%

From I-75 in Detroit, take Exit 65B, 14 Mile Rd. Go West on 14 Mile Rd. 2/10 Mile to Stephenson Hwy. Turn Right (North) onto Stephenson Hwy. approx. 5/10 Mile to Rankin Dr. Go West on Rankin Dr. approx. 3/10 Mile to Auction Site, left hand side, 1260 Rankin Dr. Watch For Signs!

Gallery: Untitled

Click on any image to view larger.

Business Closed-Tool and Die Facility

Details

Auction Terms

Directions/Map

Gallery: Untitled