surplus-equipment-to-phillips-tube-group-inc
Auction #182830

Surplus Equipment to Phillips Tube Group, Inc.

Online Auction

ONLINE AUCTION - Featuring: (3) Turek & Heller Tube Mills, (2) Etna 1.5" Tube Mills, Mackintosh-Hemphill 6-Roll Tube Straightener, (4) Alpine Tube Benders & MORE!

Start:
Fri, May 7th
10:00 AM US/Eastern
End:
Tue, May 25th
11:00 AM US/Eastern
Category:
Type:
ONLINE

Description

ONLINE**AUCTION**ONLINE
SURPLUS EQUIPMENT TO PHILLIPS TUBE GROUP, INC.
1505 Dowzer Ave.
Pell City, Alabama
(Just East of Birmingham)

AUCTION OPEN NOW
AUCTION BEGINS CLOSING MAY 25, 11am

***FEATURING***
(3) TUREK & HELLER TUBE MILLS, 1.125" - 2" Diameters**(2) ETNA 1.5" TUBE MILLS
MACKINTOSH-HEMPHILL 6-ROLL TUBE STRAIGHTENER
(4) ALPINE TUBE BENDERS (2) 3/4" CAPACITY & (2) 1.375" CAPACITY BENDERS
(2) DUTCH BEWO SAWS, MODEL DCH-70-M CUT TO LENGTH HIGH SPEED SAWS
TOYOTA 14,600 lb. CAPACITY FORKLIFT**SNORKEL AERIAL WORK PLATFORM
LUCAS 42B-60 HORIZ BORING MILL LODGE & SHIPLEY & MONARCH LATHES


TUBE MILLS
  • Turek & Heller Tube Mill, Model WU11, Stainless Steel TIG Tube Mill, 1/4" to 1" Diameter, to .065 Wall Thickness. Littell 2000# Payoff Reel, 3 Forming/3 Fin Stands, 3 Sizing Stands, Universal Drive, 1.125" Diameter Shaft, 2 Roll Weld Box, Miller 652 Welder, Cold Saw Cutoff, REA Printer, Lots of Extra Tooling.
  • Turek & Heller Tube Mill, Model WU11, Stainless Steel TIG Tube Mill, 1/4" to 1" Diameter to.065 Wall Thickness, 4000# Payoff Reel, 3 Forming/3 Fin Stands, 3 Sizing Stands, Universal Drive, 1.125" Shaft Diameter, 2 Roll Weld Box, Miller Gold Star 452 Welder, Flying Cold Saw Cut-Off,
  • Turek & Heller Tube Mill, model WU2010, s/n 1094, Stainless Steel TIG Tube Mill, 1/2" to 2" Capacity, to .134 Wall Thickness, 4000# Payoff Reel, 3 Forming/4 Cluster Side Rolls/2 Fin Stands, 1 Pull Out Stand, Ajax Tocco Inductron In-Line Annealing, 150KW, Flying Saw-Type Cut-off. Lots of Extra Tooling from 1" to 2.25".
  • Etna Tube Mill, Model 1KU, Stainless Steel TIG Tube Mill, 3/8" - 1.5" Diameter, x 0.018" to .085" Wall Thickness, Littell Double End Payoff Reel, 3 Forming/4Cluster Side Rolls/2Fin Stands, 1 Pull Out Stand, 3 Sizing Stands, Universal Drive, 1.5" Shaft Diameter, 2 Roll Weld Box, Miller Gold Star 452 Welder, DC Mill Motors Solid State Drive, Flying Saw Type Cutoff, Lots of Extra Tooling 1.375" & 12mm.
  • Abby Etna Tube Mill Model 1K Stainless Steel TIG Tube Mill, Capacity 3/8" to 1.5" Diameter x 018" to .085" Wall Thickness, Littell 4000# Payoff Reel, 3 Forming/4 Cluster, Side Rolls/2 Fin Stands, 1 Pull Out Stand, 3 Sizing Stands, Universal Drive, 2" Shaft Diameter, 2 Roll Weld Box, Miller Gold Star 452 Welder, Tocco Inductron In-Line Annealing, 100KW, DC Mill Motors, with Mill Dynamics Solid State Drive, Flying Saw Cutoff.
  • Turek & Heller Tube Mill Parts Machine
  • Mammesmann Meer 6-Roll Tube Straightener, 2 Motor, Capacity Max Tube Diameter 2.250", Roll Dimensions 5-3/4" Length x 3-1/2" Diameter at Ends, with Entry Feed and Exit Tables.

ALPINE TUBE BENDERS
  • Alpine Tube & Pipe Bender Model AB CNC25ED, 3/4" Capacity, with Pipe Feed Unit, s/n 131110, Max Pipe OD, Mild Steel-25mm OD, Hybrid Electric.
  • Alpine Tube & Pipe Bender Model AB CNC25ED, 3/4" Capacity, s/n 140229, Max Pipe OD, Mild Steel-25mm OD, Hybrid Electric.
  • Alpine Tube & Pipe Bender Model AB CNC30EBR, 1.375" Capacity, s/n130514, Max Pipe OD, Mild Steel-30mm Hybrid Electric.
  • Alpine Tube & Pipe Bender Model AB CNC50HS, 1.375" Capacity, s/n 110118, New in 2011, Max Pipe OD, Mild Steel-50.8mm, Stainless Tube 50.8 x 1.3mm, Sq. Tube Mild Steel 40mm x 1.8, Hydraulic.
  • Eaton Leonard Tube & Pipe Bender, Machine not currently in use, but we are told was in good working order when de-commissioned.

COOLING TOWERS
  • Marley Aqua Cooling Tower, 175 Gallon Capacity.
  • Hydro Thrift Cooling Tower 150 Gallon Capacity.

FORKLIFTS**AERIAL WORK PLATFORM**OVERHEAD CRANE
  • Toyota Model 7FGCU70 Forklift, 14,600 lb. Capacity at 24" Hard Tire, LP Gas, 12' Tall Mast, Side Shift, Runs Great.
  • Snorkelift Aerial Platform Model 41E, 500 lb. Capacity, 40' Height, Battery Operated, This machine is up and running.
  • Hyster Forklift, Model S50XM, LP Gas, Hard Tire, Not currently in running condition.
  • Raymond Model 75-SL100 Electric Narrow Isle Forklift with charger.
  • Free Standing Overhead Monorail Hoist, Over all Size is Approximately 10' x 60' Long & 8' Under the Hook, with Coffing 3 ton Capacity Cable Hoist.

MISCELLANEOUS MACHINES
  • (2) 2003 & 2002 Dutch Bewo Cut to Length High Speed Saw, Double Cut, Auto Load & DB90 Unloader, Deburring, Chip Conveyor, Torit Dust Collector, Pneumatic Powered Scissor Lift and 480 volt Transformer, max length of product feed 275.6". (Located In Shelby Ohio Facility of Shelby Welded Tube)
  • Lucas model "42B 60" Horizontal Boring Mill, 48" x 72" table, 4" capacity. (Shelby, Ohio)
  • Lodge & Shipley 20" x 84" Tool Room Lathe, 18" 3 & 4-jaw chucks, face plate, follow rest, Tool post, Taper Attachment. (Shelby, Ohio)
  • Abrasive No. 3B Hand Feed Surface Grinder, 8" x 24" Magnetic Chuck.
  • Monarch 14" x 54" Tool Room Lathe, s/n 31887, Follow Rest, 3-jaw chuck.
  • Wilton 14" Vertical Bandsaw.
  • Tenneco Hydraulic Flattening Press.
  • Huth Tube Expander (Swager) model 1691
  • Ajax Tocco Tube Heater
  • Eaton Leonard model SC Hydraulic Pump.
  • American Industrial Heat Transfer.
  • Scotchman Bewo Cold Saw, 2.5 hp.
  • Sotech Trim Saw.
  • Tennant Model 5680 Floor Sweeper/Scrubber


SUPPORT EQUIPMENT, TOOLS, SHOP EQUIPMENT
  • Pressure Testers, (8) Barrels of Star-Glo Premium Floor Finish, Various lots of Bearings, Miller Welder Parts machine, welding supplies, Fasteners, steel work benches, Kurt and Wilton Vises, Gaylord box of heavy duty castors, sprockets, saw blades & misc., rubber floor mats, steel shop carts, Shelving, Werner Step ladder and extension ladder, Brute Waste Barrels, Large quantity of office furnishings, 2 & 4-wheel carts, Forklift Man Basket, LP Gas Tank Racks. Scotsman Ice & Water Dispenser.

TERMS: Everything sells "As is, Where is, In Place" with all defects whether apparent or not. It is the Buyer's responsibility to inspect before bidding. Everything is to be paid for in full with Cash, Check, Visa, MC Discover, AMEX, Certified Funds, Wire Transfer. There is an 18% Buyers Premium in effect for this auction. An additional 3% will be added if you pay with a credit card.
RIGGING: American Rigging has been assisting Phillips Tube Group by moving machinery to other facilities and currently has Rigging Equipment at the auction site and is willing to begin immediately following the online auction to move machinery to your facility. For Pricing, Please Call Richard Albrecht at (937)251-9800 or email richard@americanrig.com
TECHNICAL ADVISOR: NATIONAL MACHINERY EXCHANGE: CALL BRUCE 973-489-3209

FOR ONLINE BIDDING PLEASE GO TO:
www.thompsonauctioneers.com or www.bidspotter.com
THOMPSON AUCTIONEERS, INC.
Steve Thompson, Auctioneer
(937)426-8446
Alabama Auctioneers License # 5376

Dates

Bidding Dates
Friday
7
May '21
at
10:00 AM
US/Eastern
Tuesday
25
May '21
at
11:00 AM
US/Eastern
Preview Dates
Monday
24
May '21
at
11:00 AM
US/Eastern
Monday
24
May '21
at
04:00 PM
US/Eastern
Pre-bidding Dates
Checkout Dates

Terms

INSPECTION: Monday, May 24, 11:00 a.m. - 4:00 p.m.

TERMS: Everything sells “As is, Where is, In Place” with all defects whether apparent or not. It is the Buyer’s responsibility to
inspect before bidding. Everything is to be paid for in full with Cash, Check, Visa, MC Discover, AMEX, Certified Funds, Wire Transfer.
There is an 18% Buyers Premium in effect for this auction. An additional 3% will be added if you pay with a credit card.

RIGGING: American Rigging has been assisting Phillips Tube Group by moving machinery to other facilities and
currently has Rigging Equipment at the auction site and is willing to begin immediately following the online auction
to move machinery to your facility. For Pricing, Please Call Richard Albrecht at (937)251-9800 or
contact by email to richard@americanrig.com

TECHNICAL ADVISOR: NATIONAL MACHINERY EXCHANGE, CALL BRUCE 973-489-3209