Auction Closed
roesch-manufacturing-co-llc
Auction #202880

Roesch Manufacturing Co., LLC

Live Online Only Auction - Extremely Clean CNC Machinery

LIVE ONLINE ONLY AUCTION - Facility Closed - Extremely Clean CNC Machinery, Featuring: Haas Mini Mill, (2) Hardinge Cobra CNC Turning Centers, (2) Emco Maier Emco-Turn CNC Turning Centers & MORE!

Ended:
Jan 18th 2022
5:00 PM US/Eastern
Category:
Featured
Type:

Description

LIVE ON-LINE ONLY PUBLIC AUCTION
FACILITY CLOSED-EXTREMELY CLEAN CNC MACHINERY

ROESCH MANUFACTURING CO., LLC
904 Industrial Dr., Tecumseh, Michigan 49286

AUCTION DATE TUESDAY, JANUARY 18, 10:00 AM

INSPECTION WILL BE OFFERED ON MONDAY, JANUARY 17, 10-5 EST Or By Appointment

Featuring
Haas Mini Mill with 4th Axis Indexer
(2) Hardinge Cobra 42 CNC Turning Centers
(2) Emco Maier Emco-Turn 325 CNC Turning Centers
Emco Maier Emco-Turn 220 CNC Turning Center
Roto-Finish Spiratron ST-1 Deburring Tumbler
Atlas Copco GX7-FF Rotary Screw Air Compressor
Yale 5,000 Lb. Fork Lift
Numerous Additional Machines
Large Quantity Tooling and Shop Support Items

SALE MANAGED BY BIDSPOTTER.COM TO REGISTER, BID, OR FOR TERMS AND CONDITIONS, VISIT
BIDSPOTTER.COM

IF YOU REQUIRE ASSISTANCE IN REGISTERING, OR FOR PROXY BIDDING, PLEASE CALL OUR OFFICE AT 937-426-8446

THOMPSON AUCTIONEERS, INC.
937-426-8446*www.thompsonauctioneers.com
Stephen Thompson, Auctioneer
Ohio License #63199566109

Dates

Bidding Dates
Tuesday
18
Jan '22
at
10:00 AM
US/Eastern
Tuesday
18
Jan '22
at
05:00 PM
US/Eastern
Preview Dates
Monday
17
Jan '22
at
10:00 AM
US/Eastern
Monday
17
Jan '22
at
05:00 PM
US/Eastern
Pre-bidding Dates
Checkout Dates

Marketing

HAAS CNC MINI MILL

  • Haas CNC Mini Mill, s/n 48468, New 2006, Haas CNC Control, 4th Axis Card, 36” X 12” Table, 16” X 12” X 10” Travels, Cat 40 Taper, 6,000 RPM, 10 Position Tool Changer, Includes Haas 5C CNC Indexer, Extra Memory, 9,287 Cutting Hours, 1,663 Cycle Hours, 1,293 Cutting Hours (Note: Hours Recorded on November 23, 2021)
CNC TURNING CENTERS
  • Hardinge Model Cobra 42 CNC Turning Center, s/n c-550-T, New 1997, Fanuc 21-T CNC Control, 1 5/8” Capacity, 8.25” Maximum Turning Diameter, 14” Maximum Centers, 7.75” X-Axis Travel, 14” Z-Axis Travel, 12 Tool Turret, 16C Collet Nose, Chip Conveyor, Parts Catcher, Tailstock, Spego Turnamic 126 Bar Feed
  • Hardinge Model Cobra 42 CNC Turning Center, s/n C-959, New 1998, Fanuc 21-T CNC Control, 1 5/8” Capacity, 8.25” Maximum Turning Diameter, 14” Maximum Centers, 7.75” X-Axis Travel, 14” Z-Axis Travel, 12 Tool Turret, 16C Collet Nose, Chip Conveyor, Parts Catcher, Spego Turnamic 126 Bar Feed
  • Emco Model Emco-Turn 325 CNC Turning Center, s/n A7GP0804,
  • New 2001, Fanuc 21T CNC Control, 1.025” Capacity, 7” Swing Over Bed, 2.3” X-Axis Travel, 7” Z-Axis Travel, 8 Tool Turret, Tailstock, 5C Collet Attachment
  • Emco Model Emco-Turn 325 CNC Turning Center, s/n A7GN5004,
  • New 2000, Fanuc 21T CNC Control, 1.025” Capacity, 7” Swing Over Bed, 2.3” X-Axis Travel, 7” Z-Axis Travel, 8 Tool Turret, Tailstock, 5C Collet Attachment
  • Emco Model Emco-Turn 220 CNC Turning Center, s/n A7NE1E2009,
  • Emcotronic T1 CNC Control, 1.025” Capacity, 7” Swing Over Bed, 2.3” X-Axis Travel, 7” Z-Axis Travel, 8 Tool Turret
AUTOMATIC TURRET LATHE
  • EMI-MEC Autoturn 2E Automatic Turret Lathe, Vertical Slide, 2 Cross Slides, Peg Board Controls
VIBRATORY FINISHER
  • Spiratron Model ST-1 Vibratory Finisher, s/n ?????, 21.5” Bowl Diameter, Coolant System, Controls, Discharge Separator Ramp, Estimated 1 Cubic Foot Capacity
FORK LIFT
  • Yale Fork Lift, Model GLC050RF1XUAE082, s/n E187V02448T, 5,000 Lb. Capacity, LP, Cage, Side Shift, Hard Tire
AIR COMPRESSOR
  • Atlas Copco Model GX7FF Rotary Screw Air Compressor, s/n CA1444182, New 2010, 10 HP, with Built In Air Dryer, 60 Gallon Tank, 6,700 Run Hrs.
MISCELLANEOUS MACHINERY
  • Trinco 48/BP Sand Blast Cabinet, with Reclaimer
  • (3) Delta Model 11-990 Bench Top Drill Presses, 12”, 110/1/60 AC
  • (3) Baldor Double End Grinder/Buffers, 1/3 HP, 110/1/60 AC
  • Milwaukee Abrasive Cutoff Saw
  • (2) Atlas Speed Lathes
  • Kalamazoo 2” Belt Sander, 110/1/60
  • (5) Gray Mills Parts Washers
  • Saylor-Beall 10 HP Tank Mounted Air Compressor
  • Darex Model M4 Drill Grinder with Attachments
  • Jet Horizontal Band Saw, 6” Capacity, Model HVBS-7M
  • Master Chemical Yellow Bellied Sump Sucker, s/n 6533, New 2005, 50 Gallon Capacity
  • Horizontal Hand Miller (Hardinge TM Mill Copy)
TOOLING AND SHOP SUPPORT ITEMS
  • Mills, Drills, Reamers, Taps, Dies, Carbide Inserts, Collets, Kurt Vises, 40 Taper Holders, Clamps, CNC Lathe Tooling, 40 Taper Holders, Saw Blades, Abrasives, Grinding Wheels, Hose, Chain, Office Furniture, Machine and Building Maintenance Items, Hardware, Fastening Items, Tool Cabinets, Work Benches, Many Additional Items

Preview

INSPECTION: Monday, January 17, 10:00 am - 5:00 pm EST

Terms

LIVE ONLINE ONLY AUCTION: Online Bidding managed by Bidspotter.com. Place online pre-bids leading up to sale date on Bidspotter.com. On Auction Date, visit Bidspotter.com to join the live webcast, view the live auction of each lot, and enter any bids on-line. Only online bids will be accepted. There is NO onsite bidding.


TERMS: Everything in this auction sells on an "As is, where is, in place" basis with all defects whether apparent or not. It is the Buyer's responsibility to inspect before bidding. Even though information has been received from sources deemed reliable, Thompson Auctioneers, Inc. makes NO warranty or guarantee as to the accuracy of the information herein contained.

BUYER'S PREMIUM: An 18% Buyer’s Premium is in effect for this auction. Payments can be made onsite at removal using Cash, Check, or Certified Funds. Payments using American Express, Discover, MasterCard, or Visa can be made through our office at 937-426-8446 with a 3% fee. Wire Transfer information will be provided on your invoice.

Documents